3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7 compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
8 model = "BT OpenReach VDSL Modem";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
18 led-upgrade = &power_green;
24 device_type = "memory";
25 reg = <0x0 0x2000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
34 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RESTART>;
40 compatible = "gpio-leds";
44 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
47 /* power-* is a bicolour led */
48 power_green: power_green {
49 label = "green:power";
50 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
51 default-state = "keep";
54 power_red: power_red {
56 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
61 compatible = "gpio-export";
65 gpio-export,name = "power_led_blink";
66 gpio-export,output = <0>;
67 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
74 compatible = "lantiq,xrx200-pdi";
81 compatible = "lantiq,xrx200-pdi-port";
84 phy-handle = <&phy11>;
88 compatible = "lantiq,xrx200-pdi-port";
91 phy-handle = <&phy14>;
98 compatible = "lantiq,xrx200-mdio";
100 phy11: ethernet-phy@11 {
102 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
105 phy14: ethernet-phy@14 {
107 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
113 lantiq,gphy-mode = <GPHY_MODE_FE>;
117 lantiq,gphy-mode = <GPHY_MODE_FE>;
122 compatible = "lantiq,nor";
124 reg = <0 0x0 0x0800000>;
127 compatible = "fixed-partitions";
128 #address-cells = <1>;
137 label = "u-boot-env";
138 reg = <0x30000 0x10000>;
143 reg = <0x40000 0x750000>;
148 reg = <0x790000 0x70000>;