3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7 compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
8 model = "Orange Livebox 2.1";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_green;
16 led-failsafe = &power_green;
17 led-running = &power_green;
18 led-upgrade = &power_green;
20 led-dsl = &internet_green;
24 device_type = "memory";
25 reg = <0x0 0x8000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
34 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RESTART>;
39 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_RFKILL>;
44 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_WPS_BUTTON>;
50 compatible = "gpio-leds";
54 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
57 label = "red:internet";
58 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
60 power_green: power_green {
61 label = "green:power";
62 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
63 default-state = "keep";
67 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
70 label = "orange:internet";
71 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
73 internet_green: internet_green {
74 label = "green:internet";
75 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
78 label = "green:voice";
79 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
83 usb_vbus: regulator-usb-vbus {
84 compatible = "regulator-fixed";
86 regulator-name = "USB_VBUS";
88 regulator-min-microvolt = <5000000>;
89 regulator-max-microvolt = <5000000>;
91 gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
98 compatible = "lantiq,xrx200-pdi";
102 mtd-mac-address = <&boardconfig 0x16>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy0>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy11>;
118 compatible = "lantiq,xrx200-pdi-port";
121 phy-handle = <&phy12>;
124 compatible = "lantiq,xrx200-pdi-port";
127 phy-handle = <&phy13>;
130 compatible = "lantiq,xrx200-pdi-port";
133 phy-handle = <&phy14>;
138 #address-cells = <1>;
140 compatible = "lantiq,xrx200-mdio";
142 phy0: ethernet-phy@0 {
144 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
146 phy11: ethernet-phy@11 {
148 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
150 phy12: ethernet-phy@12 {
152 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
154 phy13: ethernet-phy@13 {
156 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
158 phy14: ethernet-phy@14 {
160 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
166 lantiq,gphy-mode = <GPHY_MODE_FE>;
170 lantiq,gphy-mode = <GPHY_MODE_FE>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&state_default>;
177 state_default: pinmux {
179 lantiq,pins = "io21";
188 compatible = "lantiq,nor";
190 reg = <0 0x0 0x2000000>;
193 compatible = "fixed-partitions";
194 #address-cells = <1>;
204 label = "u-boot-env";
205 reg = <0x60000 0x20000>;
211 reg = <0x80000 0x1f00000>;
214 boardconfig: partition@1f80000 {
215 label = "boardconfig";
216 reg = <0x1f80000 0x80000>;
225 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
238 vbus-supply = <&usb_vbus>;
243 vbus-supply = <&usb_vbus>;