3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7 compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
8 model = "BT OpenReach VDSL Modem";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
18 led-upgrade = &power_green;
24 device_type = "memory";
25 reg = <0x0 0x2000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
33 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
34 linux,code = <KEY_RESTART>;
39 compatible = "gpio-leds";
43 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
47 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
50 label = "green:power";
51 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
52 default-state = "keep";
58 pinctrl-0 = <&mdio_pins>,
59 <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
60 <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
63 compatible = "lantiq,xrx200-pdi";
70 compatible = "lantiq,xrx200-pdi-port";
73 phy-handle = <&phy11>;
76 compatible = "lantiq,xrx200-pdi-port";
79 phy-handle = <&phy13>;
86 compatible = "lantiq,xrx200-mdio";
88 phy11: ethernet-phy@11 {
90 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
91 lantiq,led1h = <0x70>;
92 lantiq,led1l = <0x00>;
93 lantiq,led2h = <0x00>;
94 lantiq,led2l = <0x03>;
96 phy13: ethernet-phy@13 {
98 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
99 lantiq,led1h = <0x70>;
100 lantiq,led1l = <0x00>;
101 lantiq,led2h = <0x00>;
102 lantiq,led2l = <0x03>;
108 lantiq,gphy-mode = <GPHY_MODE_GE>;
112 lantiq,gphy-mode = <GPHY_MODE_GE>;
117 compatible = "lantiq,nor";
119 reg = <0 0x0 0x2000000>;
122 compatible = "fixed-partitions";
123 #address-cells = <1>;
128 reg = <0x00000 0x20000>;
133 reg = <0x20000 0x7d0000>;
137 label = "u-boot-env";
138 reg = <0x7f0000 0x10000>;
146 gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;