1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "vr9_avm_fritz736x.dtsi"
6 compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
7 model = "AVM FRITZ!Box 7362 SL";
11 pinctrl-names = "default";
12 pinctrl-0 = <&state_default>;
14 state_default: pinmux {
22 lantiq,pins = "io44", "io45";
37 compatible = "jedec,spi-nor";
39 spi-max-frequency = <1000000>;
42 compatible = "fixed-partitions";
46 urlader: partition@0 {
53 reg = <0x40000 0x60000>;
59 reg = <0xA0000 0x60000>;
69 compatible = "lantiq,nand-xway";
72 reg = <1 0x0 0x2000000>;
74 pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
75 pinctrl-names = "default";
77 nand-ecc-engine = <&flash1>;
80 compatible = "fixed-partitions";
91 reg = <0x400000 0x7c00000>;
98 gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
102 #address-cells = <2>;
107 nvmem-cells = <&macaddr_urlader_a91>;
108 nvmem-cell-names = "mac-address";
109 mac-address-increment = <(-2)>;
113 reset-gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
117 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
121 compatible = "nvmem-cells";
122 #address-cells = <1>;
125 macaddr_urlader_a91: macaddr@a91 {