3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7 compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
8 model = "Netgear DM200";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_green;
16 led-failsafe = &power_amber;
17 led-running = &power_green;
18 led-upgrade = &power_green;
24 device_type = "memory";
25 reg = <0x0 0x4000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
33 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
34 linux,code = <KEY_RESTART>;
39 compatible = "gpio-export";
43 gpio-export,name = "annexa";
44 gpio-export,output = <0>;
45 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
48 gpio-export,name = "annexb";
49 gpio-export,output = <0>;
50 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
55 compatible = "gpio-leds";
57 power_amber: power_amber {
58 label = "amber:power";
59 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
61 power_green: power_green {
62 label = "green:power";
63 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
68 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
72 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
77 gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
79 dsl_green: dsl_green {
81 gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
87 lantiq,phys = <&gphy1>;
90 compatible = "lantiq,xrx200-pdi";
96 compatible = "lantiq,xrx200-pdi-port";
99 phy-handle = <&phy13>;
104 #address-cells = <1>;
106 compatible = "lantiq,xrx200-mdio";
108 phy13: ethernet-phy@13 {
110 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
116 lantiq,gphy-mode = <GPHY_MODE_FE>;
127 compatible = "jedec,spi-nor";
129 spi-max-frequency = <10000000>;
132 #address-cells = <1>;
134 compatible = "fixed-partitions";
143 reg = <0x20000 0x10000>;
144 label = "gphyfirmware";
149 reg = <0x30000 0x7b0000>;
154 reg = <0x7e0000 0x10000>;
160 reg = <0x7f0000 0x2000>;
161 label = "u-boot-env";
166 reg = <0x7f2000 0x1000>;
172 reg = <0x7f3000 0x1000>;
178 reg = <0x7f4000 0xc000>;