1 #include "vr9_zyxel_p-2812hnu-fx.dtsi"
4 compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
5 model = "ZyXEL P-2812HNU-F3";
18 compatible = "pci1814,3092";
19 reg = <0x7000 0 0 0 0>;
20 ralink,eeprom = "RT3092.eeprom";
26 compatible = "lantiq,nor";
28 reg = <0 0x0 0x800000>;
30 pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
31 pinctrl-names = "default";
34 compatible = "fixed-partitions";
45 reg = <0x50000 0x10000>;
49 reg = <0x60000 0x7a0000>;
55 compatible = "lantiq,nand-xway";
58 reg = <1 0x0 0x2000000>;
68 reg = <0x200000 0x7e00000>;
75 reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;