target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
   9         model = "Arcor 801";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_blue;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_blue;
  19
  20                 led-dsl = &dsl_blue;
  21                 led-usb = &led_usb;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x2000000>;
  27         };
  28
  29         ath5k_eep {
  30                 compatible = "ath5k,eeprom";
  31                 ath,eep-flash = <&boardconfig 0x400>;
  32                 ath,mac-offset = <0x0>;
  33                 ath,eep-swap;
  34         };
  35
  36         gpio-keys-polled {
  37                 compatible = "gpio-keys-polled";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40                 poll-interval = <100>;
  41
  42                 rfkill {
  43                         label = "rfkill";
  44                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RFKILL>;
  46                 };
  47                 wps {
  48                         label = "wps";
  49                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_WPS_BUTTON>;
  51                 };
  52                 reset {
  53                         label = "reset";
  54                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_RESTART>;
  56                 };
  57         };
  58
  59         gpio-leds {
  60                 compatible = "gpio-leds";
  61                 power_blue: power0 {
  62                         label = "arv452cqw:blue:power";
  63                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  64                         default-state = "keep";
  65                 };
  66                 dsl_blue: dsl {
  67                         label = "arv452cqw:blue:dsl";
  68                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  69                 };
  70                 isdn {
  71                         label = "arv452cqw:blue:isdn";
  72                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  73                 };
  74                 power_red: power1 {
  75                         label = "arv452cqw:red:power";
  76                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  77                 };
  78                 wps {
  79                         label = "arv452cqw:blue:wps";
  80                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  81                 };
  82                 wps1 {
  83                         label = "arv452cqw:yellow:wps";
  84                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  85                 };
  86                 fxs1 {
  87                         label = "arv452cqw:blue:telefon1";
  88                         gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
  89                 };
  90                 fxs2 {
  91                         label = "arv452cqw:blue:telefon2";
  92                         gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
  93                 };
  94                 wps2 {
  95                         label = "arv452cqw:red:wps";
  96                         gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
  97                 };
  98                 fxo {
  99                         label = "arv452cqw:blue:line";
 100                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
 101                 };
 102                 voice {
 103                         label = "arv452cqw:blue:sprache";
 104                         gpios = <&gpiomm 4 1>;
 105                 };
 106                 led_usb: usb {
 107                         label = "arv452cqw:blue:usb";
 108                         gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
 109                 };
 110                 wifi: wifi {
 111                         label = "arv452cqw:blue:wlan";
 112                         gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 113                 };
 114                 /*
 115                         internet blue and internet red are missing
 116                         dsl2 and dsl3 are not referenced in manual
 117                 */
 118                 dsl2 {
 119                         label = "arv452cqw:yellow:dsl";
 120                         gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
 121                 };
 122                 dsl3 {
 123                         label = "arv452cqw:red:dsl";
 124                         gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 125                 };
 126         };
 127 };
 128
 129 &gpio {
 130         pinctrl-names = "default";
 131         pinctrl-0 = <&state_default>;
 132
 133         state_default: pinmux {
 134                 ebu {
 135                         lantiq,groups = "ebu cs1";
 136                         lantiq,function = "ebu";
 137                 };
 138                 pci_in {
 139                         lantiq,groups = "req1";
 140                         lantiq,function = "pci";
 141                         lantiq,open-drain = <1>;
 142                         lantiq,pull = <2>;
 143                         lantiq,output = <0>;
 144                 };
 145                 pci_out {
 146                         lantiq,groups = "gnt1";
 147                         lantiq,function = "pci";
 148                         lantiq,output = <1>;
 149                 };
 150                 pci_rst {
 151                         lantiq,pins = "io21";
 152                         lantiq,pull = <0>;
 153                         lantiq,output = <1>;
 154                 };
 155                 leds {
 156                         lantiq,pins = "io3", "io5", "io6", "io7", "io9";
 157                         lantiq,output = <1>;
 158                 };
 159         };
 160 };
 161
 162 &gpiomm {
 163         status = "okay";
 164         lantiq,shadow = <0x77f>;
 165 };
 166
 167 /*
 168 #define ARV452CPW_SWITCH_RESET          110
 169 */
 170 &gsw {
 171         phy-mode = "rmii";
 172         mtd-mac-address = <&boardconfig 0x16>;
 173 };
 174
 175 &localbus {
 176         nor@0 {
 177                 compatible = "lantiq,nor";
 178                 bank-width = <2>;
 179                 reg = <0 0x0 0x400000>;
 180                 #address-cells = <1>;
 181                 #size-cells = <1>;
 182
 183                 partitions {
 184                         compatible = "fixed-partitions";
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187
 188                         partition@0 {
 189                                 label = "uboot";
 190                                 reg = <0x00000 0x10000>;
 191                                 read-only;
 192                         };
 193
 194                         partition@10000 {
 195                                 label = "uboot_env";
 196                                 reg = <0x10000 0x10000>;
 197                                 read-only;
 198                         };
 199
 200                         partition@20000 {
 201                                 label = "firmware";
 202                                 reg = <0x20000 0x3d0000>;
 203                         };
 204
 205                         boardconfig: partition@3f0000 {
 206                                 label = "boardconfig";
 207                                 reg = <0x3f0000 0x10000>;
 208                                 read-only;
 209                         };
 210                 };
 211         };
 212 };
 213
 214 &pci0 {
 215         status = "okay";
 216         lantiq,external-clock;
 217         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 218 };
 219
 220 &usb {
 221         status = "okay";
 222         gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
 223 };
 224
 225 &vmmc {
 226         status = "okay";
 227         gpios = <&gpio 31 GPIO_ACTIVE_HIGH
 228                 &gpiomm 7 GPIO_ACTIVE_HIGH>;
 229 };