5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
9 model = "Speedport W303V Typ A";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
19 led-upgrade = &power_green;
21 led-dsl = &power_green;
22 led-internet = &online;
27 reg = <0x0 0x2000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_WPS_BUTTON>;
43 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
49 compatible = "gpio-leds";
51 label = "arv7525pw:green:power";
52 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
53 default-state = "keep";
56 label = "arv7525pw:red:power";
57 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
60 label = "arv7525pw:green:online";
61 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
64 label = "arv7525pw:green:telefonie";
65 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
68 label = "arv7525pw:red:telefonie";
69 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
72 label = "arv7525pw:green:wlan";
73 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&state_default>;
82 state_default: pinmux {
84 lantiq,groups = "exin1";
85 lantiq,function = "exin";
88 lantiq,groups = "gnt1", "req1";
89 lantiq,function = "pci";
96 mtd-mac-address = <&boardconfig 0x16>;
101 compatible = "lantiq,nor";
103 reg = <0 0x0 0x2000000>;
104 #address-cells = <1>;
108 compatible = "fixed-partitions";
109 #address-cells = <1>;
114 reg = <0x00000 0x10000>;
120 reg = <0x10000 0x10000>;
126 reg = <0x20000 0x3d0000>;
129 boardconfig: partition@400000 {
130 label = "board_config";
131 reg = <0x3f0000 0x10000>;
140 interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
143 compatible = "pci0,0";
144 reg = <0x7000 0 0 0 0>;
145 ralink,mtd-eeprom = <&boardconfig 0x410>;
151 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;