1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,ar9";
13 stdout-path = "serial0:115200n8";
18 compatible = "mips,mips34K";
23 device_type = "memory";
29 compatible = "lantiq,biu", "simple-bus";
30 reg = <0x1f800000 0x800000>;
31 ranges = <0x0 0x1f800000 0x7fffff>;
34 #interrupt-cells = <1>;
36 compatible = "lantiq,icu";
45 compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
55 compatible = "lantiq,sram", "simple-bus";
56 reg = <0x1f000000 0x800000>;
57 ranges = <0x0 0x1f000000 0x7fffff>;
60 #interrupt-cells = <1>;
62 compatible = "lantiq,eiu-xway";
63 reg = <0x101000 0x1000>;
64 interrupt-parent = <&icu0>;
65 lantiq,eiu-irqs = <166 135 66 40 41 42>;
69 compatible = "lantiq,pmu-xway";
70 reg = <0x102000 0x1000>;
74 compatible = "lantiq,cgu-xway";
75 reg = <0x103000 0x1000>;
80 compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
81 reg = <0x203000 0x1000>;
82 ranges = <0x0 0x203000 0x100>;
85 reset: reset-controller@10 {
86 compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
87 reg = <0x10 4>, <0x14 4>;
92 usb_phy0: usb2-phy@18 {
93 compatible = "lantiq,xrx100-usb2-phy";
97 resets = <&reset 4 4>;
102 usb_phy1: usb2-phy@34 {
103 compatible = "lantiq,xrx100-usb2-phy";
107 resets = <&reset 28 28>;
108 reset-names = "ctrl";
113 compatible = "syscon-reboot";
124 #address-cells = <1>;
126 compatible = "lantiq,fpi", "simple-bus";
127 ranges = <0x0 0x10000000 0xeefffff>;
128 reg = <0x10000000 0xef00000>;
130 localbus: localbus@0 {
131 #address-cells = <2>;
133 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
134 1 0 0x4000000 0x4000010>; /* addsel1 */
135 compatible = "lantiq,localbus", "simple-bus";
139 compatible = "lantiq,gptu-xway";
140 reg = <0xe100a00 0x100>;
141 interrupt-parent = <&icu0>;
142 interrupts = <126 127 128 129 130 131>;
145 asc0: serial@e100400 {
146 compatible = "lantiq,asc";
147 reg = <0xe100400 0x400>;
148 interrupt-parent = <&icu0>;
149 interrupts = <104 105 106>;
154 compatible = "lantiq,xrx100-spi";
155 reg = <0xe100800 0x100>;
156 interrupt-parent = <&icu0>;
157 interrupts = <22 23 24>;
158 interrupt-names = "spi_rx", "spi_tx", "spi_err",
160 #address-cells = <1>;
165 gpio: pinmux@e100b10 {
166 compatible = "lantiq,xrx100-pinctrl";
169 reg = <0xe100b10 0xa0>;
174 compatible = "lantiq,gpio-stp-xway";
176 reg = <0xe100bb0 0x40>;
180 asc1: serial@e100c00 {
181 compatible = "lantiq,asc";
182 reg = <0xe100c00 0x400>;
183 interrupt-parent = <&icu0>;
184 interrupts = <112 113 114>;
188 compatible = "lantiq,arx100-usb";
189 reg = <0xe101000 0x1000
191 interrupt-parent = <&icu0>;
192 interrupts = <62 91>;
195 phy-names = "usb2-phy";
200 compatible = "lantiq,arx100-usb";
201 reg = <0xe106000 0x1000
203 interrupt-parent = <&icu0>;
207 phy-names = "usb2-phy";
212 compatible = "lantiq,deu-arx100";
213 reg = <0xe103100 0xf00>;
217 compatible = "lantiq,dma-xway";
218 reg = <0xe104100 0x800>;
222 compatible = "lantiq,ebu-xway";
223 reg = <0xe105300 0x100>;
227 compatible = "lantiq,mei-xway";
228 interrupt-parent = <&icu0>;
233 compatible = "lantiq,etop-xway";
234 reg = <0xe180000 0x40000
236 interrupt-parent = <&icu0>;
237 interrupts = <73 72>;
238 mac-address = [ 00 11 22 33 44 55 ];
242 compatible = "lantiq,ppe-arx100";
243 interrupt-parent = <&icu0>;
249 #address-cells = <3>;
251 #interrupt-cells = <1>;
252 compatible = "lantiq,pci-xway";
253 bus-range = <0x0 0x0>;
254 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
255 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
256 reg = <0x7000000 0x8000 /* config space */
257 0xe105400 0x400>; /* pci bridge */
258 lantiq,bus-clock = <33333333>;
259 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
260 interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
266 compatible = "lantiq,adsl-arx100";