5 #include <dt-bindings/input/input.h>
8 compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
9 model = "AVM FRITZ!Box 7320";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power;
21 led-dsl = &info_green;
26 device_type = "memory";
27 reg = <0x0 0x4000000>;
31 compatible = "gpio-keys-polled";
32 poll-interval = <100>;
36 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RFKILL>;
41 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_PHONE>;
47 compatible = "gpio-leds";
49 label = "fritz7320:green:power";
50 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
51 default-state = "keep";
54 label = "fritz7320:green:fon";
55 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
58 label = "fritz7320:green:dect";
59 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
62 label = "fritz7320:green:wlan";
63 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
65 info_green: info_green {
66 label = "fritz7320:green:info";
67 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
70 label = "fritz7320:red:info";
71 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
78 mtd-mac-address = <&ath9k_cal 0xa91>;
79 mtd-mac-address-increment = <(-2)>;
84 compatible = "lantiq,nor";
86 reg = <0 0x0 0x1000000>;
89 compatible = "fixed-partitions";
93 ath9k_cal: partition@0 {
95 reg = <0x00000 0x20000>;
101 reg = <0x20000 0xf60000>;
106 reg = <0xf80000 0x40000>;
112 reg = <0xfc0000 0x40000>;
122 pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
123 <&pci_gnt3_pins>, <&pci_gnt4_pins>,
124 <&pci_req1_pins>, <&pci_req2_pins>,
125 <&pci_req3_pins>, <&pci_req4_pins>;
128 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
131 compatible = "pci0,0";
132 reg = <0x7000 0 0 0 0>;
133 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */