5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
9 model = "Alice/O2 IAD 4421";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power_red;
22 led-internet = &internet;
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
32 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
37 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RFKILL>;
42 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RESTART>;
48 compatible = "gpio-leds";
50 label = "arv7506pw11:green:wlan";
51 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
54 label = "arv7506pw11:green:power";
55 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
56 default-state = "keep";
59 label = "arv7506pw11:green:dsl";
60 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
63 label = "arv7506pw11:green:internet";
64 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
66 power_red: power_red {
67 label = "arv7506pw11:red:power";
68 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
71 label = "arv7506pw11:red:internet";
72 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
75 label = "arv7506pw11:green:info";
76 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
79 label = "arv7506pw11:green:telefon";
80 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
83 label = "arv7506pw11:red:info";
84 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
90 pinctrl-names = "default";
91 pinctrl-0 = <&state_default>;
93 state_default: pinmux {
102 /* GPIO 19: switch reset */
105 mtd-mac-address = <&boardconfig 0x16>;
110 compatible = "lantiq,nor";
112 reg = <0 0x0 0x800000>;
115 compatible = "fixed-partitions";
116 #address-cells = <1>;
121 reg = <0x00000 0x40000>;
127 reg = <0x40000 0x10000>;
133 reg = <0x50000 0x7a0000>;
136 boardconfig: partition@7f0000 {
137 label = "board_config";
138 reg = <0x7f0000 0x10000>;
148 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
149 pinctrl-names = "default";
151 lantiq,external-clock;
152 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
155 compatible = "pci1814,3592";
156 reg = <0x7000 0 0 0 0>;
157 ralink,mtd-eeprom = <&boardconfig 0x410>;
158 ralink,mtd-eeprom-swap;
159 mtd-mac-address = <&boardconfig 0x16>;
160 mtd-mac-address-increment = <1>;