5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
9 model = "Astoria Networks ARV7519PW";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power2;
21 led-internet = &online;
26 reg = <0x0 0x4000000>;
38 compatible = "lantiq,nor";
40 reg = <0 0x0 0x2000000>;
45 compatible = "fixed-partitions";
51 reg = <0x00000 0x40000>;
57 reg = <0x40000 0x20000>;
62 reg = <0x60000 0xf80000>;
65 boardconfig: partition@fe0000 {
66 label = "board_config";
67 reg = <0xfe0000 0x20000>;
74 gpio: pinmux@E100B10 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&state_default>;
78 state_default: pinmux {
80 lantiq,groups = "ebu cs1";
81 lantiq,function = "ebu";
84 lantiq,groups = "req1";
85 lantiq,function = "pci";
86 lantiq,open-drain = <1>;
91 lantiq,groups = "gnt1";
92 lantiq,function = "pci";
102 lantiq,pins = "io19";
111 mtd-mac-address = <&boardconfig 0x16>;
114 /* warning: passive port
115 only works with active devices */
122 compatible = "gpio-keys-polled";
123 #address-cells = <1>;
125 poll-interval = <100>;
129 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
130 linux,code = <KEY_RFKILL>;
134 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
135 linux,code = <KEY_RESTART>;
140 compatible = "gpio-leds";
143 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
144 default-state = "keep";
148 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
152 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
156 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
160 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
164 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
168 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
172 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
176 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
180 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
184 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
188 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
192 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
196 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
200 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
204 /* is there another way to "reserve" the GPIO? */
206 compatible = "gpio-export";
210 gpio-export,name = "switch";
211 gpio-export,output = <1>;
212 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
219 lantiq,external-clock;
220 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
224 compatible = "pci0,0";
225 reg = <0x7000 0 0 0 0>;
226 ralink,mtd-eeprom = <&boardconfig 0x410>;
227 ralink,mtd-eeprom-swap;