1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,ase";
13 stdout-path = "serial0:115200n8";
21 compatible = "mips,mips4Kc";
27 compatible = "syscon-reboot";
37 compatible = "lantiq,biu", "simple-bus";
38 reg = <0x1f800000 0x800000>;
39 ranges = <0x0 0x1f800000 0x7fffff>;
42 #interrupt-cells = <1>;
44 compatible = "lantiq,icu";
49 compatible = "lantiq,wdt";
57 compatible = "lantiq,sram", "simple-bus";
58 reg = <0x1f000000 0x800000>;
59 ranges = <0x0 0x1f000000 0x7fffff>;
62 #interrupt-cells = <1>;
64 compatible = "lantiq,eiu-xway";
65 reg = <0x101000 0x1000>;
66 interrupt-parent = <&icu0>;
67 lantiq,eiu-irqs = <29 30 31>;
71 compatible = "lantiq,pmu-xway";
72 reg = <0x102000 0x1000>;
76 compatible = "lantiq,cgu-xway";
77 reg = <0x103000 0x1000>;
84 compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
85 reg = <0x203000 0x1000>;
86 ranges = <0x0 0x203000 0x100>;
89 reset: reset-controller@10 {
90 compatible = "lantiq,danube-reset";
91 reg = <0x10 4>, <0x14 4>;
96 usb_phy: usb2-phy@18 {
97 compatible = "lantiq,ase-usb2-phy";
101 resets = <&reset 4 4>;
102 reset-names = "ctrl";
109 #address-cells = <1>;
111 compatible = "lantiq,fpi", "simple-bus";
112 ranges = <0x0 0x10000000 0xeefffff>;
113 reg = <0x10000000 0xef00000>;
115 localbus: localbus@0 {
116 #address-cells = <2>;
118 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
119 1 0 0x4000000 0x4000010>; /* addsel1 */
120 compatible = "lantiq,localbus", "simple-bus";
124 compatible = "lantiq,ase-spi";
125 reg = <0xe100800 0x100>;
126 interrupt-parent = <&icu0>;
127 interrupts = <24 25 26>;
128 interrupt-names = "spi_rx", "spi_tx", "spi_err",
130 #address-cells = <1>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
138 compatible = "lantiq,gptu-xway";
139 reg = <0xe100a00 0x100>;
140 interrupt-parent = <&icu0>;
141 interrupts = <33 34 35 36 37 38>;
144 gpio: pinmux@e100b10 {
145 compatible = "lantiq,ase-pinctrl";
148 reg = <0xe100b10 0xa0>;
152 lantiq,groups = "asc";
153 lantiq,function = "asc";
159 lantiq,groups = "mdio";
160 lantiq,function = "mdio";
166 lantiq,groups = "spi_di";
167 lantiq,function = "spi";
170 lantiq,groups = "spi_do", "spi_clk";
171 lantiq,function = "spi";
176 spi_cs4_pins: spi-cs4 {
178 lantiq,groups = "spi_cs4";
179 lantiq,function = "spi";
185 asc1: serial@e100c00 {
186 compatible = "lantiq,asc";
187 reg = <0xe100c00 0x400>;
188 interrupt-parent = <&icu0>;
189 interrupts = <72 74 75>;
190 pinctrl-0 = <&asc_pins>;
191 pinctrl-names = "default";
195 compatible = "lantiq,mei-xway";
196 reg = <0xe116000 0x400>;
197 interrupt-parent = <&icu0>;
202 compatible = "lantiq,ase-usb";
203 reg = <0xe101000 0x1000
205 interrupt-parent = <&icu0>;
209 phy-names = "usb2-phy";
214 compatible = "lantiq,dma-xway";
215 reg = <0xe104100 0x800>;
219 compatible = "lantiq,ebu-xway";
220 reg = <0xe105300 0x100>;
224 compatible = "lantiq,ppe-ase";
225 reg = <0xe234000 0x40000>;
226 interrupt-parent = <&icu0>;
231 compatible = "lantiq,etop-xway";
232 reg = <0xe180000 0x40000>;
233 interrupt-parent = <&icu0>;
234 interrupts = <105 109>;
235 pinctrl-0 = <&mdio_pins>;
236 pinctrl-names = "default";
241 compatible = "lantiq,adsl-ase";