3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
10 bootargs = "console=ttyLTQ0,115200";
14 led-boot = &power_blue;
15 led-failsafe = &power_red;
16 led-running = &power_blue;
17 led-upgrade = &power_blue;
25 device_type = "memory";
26 reg = <0x0 0x2000000>;
30 compatible = "ath5k,eeprom";
31 ath,eep-flash = <&boardconfig 0x400>;
32 ath,mac-offset = <0x0>;
37 compatible = "gpio-keys-polled";
38 poll-interval = <100>;
42 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RFKILL>;
47 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_WPS_BUTTON>;
52 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_RESTART>;
58 compatible = "gpio-leds";
60 label = "arv452cqw:blue:power";
61 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
62 default-state = "keep";
65 label = "arv452cqw:blue:dsl";
66 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
69 label = "arv452cqw:blue:isdn";
70 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
73 label = "arv452cqw:red:power";
74 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
77 label = "arv452cqw:blue:wps";
78 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
81 label = "arv452cqw:yellow:wps";
82 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
85 label = "arv452cqw:blue:telefon1";
86 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
89 label = "arv452cqw:blue:telefon2";
90 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
93 label = "arv452cqw:red:wps";
94 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
97 label = "arv452cqw:blue:line";
98 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
101 label = "arv452cqw:blue:sprache";
102 gpios = <&gpiomm 4 1>;
105 label = "arv452cqw:blue:usb";
106 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
109 label = "arv452cqw:blue:wlan";
110 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
113 internet blue and internet red are missing
114 dsl2 and dsl3 are not referenced in manual
117 label = "arv452cqw:yellow:dsl";
118 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
121 label = "arv452cqw:red:dsl";
122 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
126 usb_vbus: regulator-usb-vbus {
127 compatible = "regulator-fixed";
129 regulator-name = "USB_VBUS";
131 regulator-min-microvolt = <5000000>;
132 regulator-max-microvolt = <5000000>;
134 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
140 pinctrl-names = "default";
141 pinctrl-0 = <&state_default>;
143 state_default: pinmux {
145 lantiq,groups = "ebu cs1";
146 lantiq,function = "ebu";
149 lantiq,pins = "io21";
154 lantiq,pins = "io3", "io5", "io6", "io7", "io9";
161 #define ARV452CPW_SWITCH_RESET 110
165 mtd-mac-address = <&boardconfig 0x16>;
170 compatible = "lantiq,nor";
172 reg = <0 0x0 0x400000>;
175 compatible = "fixed-partitions";
176 #address-cells = <1>;
181 reg = <0x00000 0x10000>;
186 label = "u-boot-env";
187 reg = <0x10000 0x10000>;
193 reg = <0x20000 0x3d0000>;
196 boardconfig: partition@3f0000 {
197 label = "boardconfig";
198 reg = <0x3f0000 0x10000>;
205 compatible = "lantiq,gpio-mm";
207 #address-cells = <1>;
211 lantiq,shadow = <0x77f>;
218 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
219 pinctrl-names = "default";
221 lantiq,external-clock;
222 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
231 vbus-supply = <&usb_vbus>;
236 gpios = <&gpio 31 GPIO_ACTIVE_HIGH
237 &gpiomm 7 GPIO_ACTIVE_HIGH>;