3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
7 model = "Speedport W303V Typ A";
10 bootargs = "console=ttyLTQ0,115200";
14 led-boot = &power_green;
15 led-failsafe = &power_red;
16 led-running = &power_green;
17 led-upgrade = &power_green;
19 led-dsl = &power_green;
20 led-internet = &online;
25 device_type = "memory";
26 reg = <0x0 0x2000000>;
30 compatible = "gpio-keys-polled";
31 poll-interval = <100>;
35 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_WPS_BUTTON>;
40 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_RESTART>;
46 compatible = "gpio-leds";
48 label = "green:power";
49 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
50 default-state = "keep";
54 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
57 label = "green:online";
58 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
61 label = "green:telefonie";
62 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
65 label = "red:telefonie";
66 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
70 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&state_default>;
79 state_default: pinmux {
81 lantiq,groups = "exin1";
82 lantiq,function = "exin";
89 mtd-mac-address = <&boardconfig 0x16>;
94 compatible = "lantiq,nor";
96 reg = <0 0x0 0x2000000>;
99 compatible = "fixed-partitions";
100 #address-cells = <1>;
105 reg = <0x00000 0x10000>;
110 label = "u-boot-env";
111 reg = <0x10000 0x10000>;
117 reg = <0x20000 0x3d0000>;
120 boardconfig: partition@3f0000 {
121 label = "board_config";
122 reg = <0x3f0000 0x10000>;
132 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
133 pinctrl-names = "default";
135 interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
138 compatible = "pci0,0";
139 reg = <0x7000 0 0 0 0>;
140 ralink,mtd-eeprom = <&boardconfig 0x410>;
146 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;