3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
8 device_type = "memory";
12 usb_vbus: regulator-usb-vbus {
13 compatible = "regulator-fixed";
15 regulator-name = "USB_VBUS";
17 regulator-min-microvolt = <5000000>;
18 regulator-max-microvolt = <5000000>;
20 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
26 pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
27 pinctrl-names = "default";
30 compatible = "lantiq,xrx200-pdi";
34 mtd-mac-address = <&romfile 0xf100>;
38 compatible = "lantiq,xrx200-pdi-port";
42 // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
45 compatible = "lantiq,xrx200-pdi-port";
48 phy-handle = <&phy11>;
51 compatible = "lantiq,xrx200-pdi-port";
54 phy-handle = <&phy13>;
57 compatible = "lantiq,xrx200-pdi-port";
67 compatible = "lantiq,xrx200-mdio";
69 phy0: ethernet-phy@0 {
71 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
73 phy5: ethernet-phy@5 {
75 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
77 phy11: ethernet-phy@11 {
79 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
81 phy13: ethernet-phy@13 {
83 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
89 lantiq,gphy-mode = <GPHY_MODE_GE>;
93 lantiq,gphy-mode = <GPHY_MODE_GE>;
97 pinctrl-names = "default";
98 pinctrl-0 = <&state_default>;
100 state_default: pinmux {
102 lantiq,pins = "io42";
104 lantiq,open-drain = <0>;
108 lantiq,pins = "io38";
118 #interrupt-cells = <1>;
120 #address-cells = <3>;
125 mediatek,mtd-eeprom = <&radio 0x0000>;
127 ieee80211-freq-limit = <5000000 6000000>;
128 mtd-mac-address = <&romfile 0xf100>;
129 mtd-mac-address-increment = <2>;
136 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
143 compatible = "jedec,spi-nor";
145 spi-max-frequency = <33250000>;
149 compatible = "fixed-partitions";
150 #address-cells = <1>;
160 reg = <0x20000 0xf90000>;
165 reg = <0xfb0000 0x10000>;
171 reg = <0xfc0000 0x10000>;
176 romfile: partition@fd0000 {
177 reg = <0xfd0000 0x10000>;
183 reg = <0xfe0000 0x10000>;
188 radio: partition@ff0000 {
189 reg = <0xff0000 0x10000>;
207 vbus-supply = <&usb_vbus>;
212 vbus-supply = <&usb_vbus>;