1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include "mt7622-buffalo-wsr.dtsi"
7 model = "Buffalo WSR-3200AX4S";
8 compatible = "buffalo,wsr-3200ax4s", "mediatek,mt7622";
11 reg = <0 0x40000000 0 0x1f000000>;
16 /* Serial NAND is shared pin with SPI-NOR */
17 serial_nand_pins: serial-nand-pins {
24 pins = "SPI_WP", "SPI_HOLD", "SPI_MOSI",
27 drive-strength = <16>;
33 drive-strength = <16>;
41 compatible = "mediatek,mt7531";
43 reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
78 phy-connection-type = "2500base-x";
91 pinctrl-names = "default";
92 pinctrl-0 = <&serial_nand_pins>;
96 compatible = "spi-nand";
98 spi-max-frequency = <104000000>;
99 nand-ecc-engine = <&snfi>;
101 mediatek,bmt-table-size = <0x1000>;
103 * - Preloader - (kernel (6MiB, in firmware))
106 mediatek,bmt-remap-range = <0x0 0x8c0000>,
107 <0x1ac0000 0x5200000>;
110 compatible = "fixed-partitions";
111 #address-cells = <1>;
122 reg = <0x80000 0x40000>;
128 reg = <0xc0000 0x80000>;
133 label = "u-boot-env";
134 reg = <0x140000 0x80000>;
138 factory: partition@1c0000 {
140 reg = <0x1c0000 0x100000>;
145 compatible = "brcm,trx";
146 brcm,trx-magic = <0x33504844>;
148 reg = <0x2c0000 0x1800000>;
153 reg = <0x1ac0000 0x1800000>;
158 reg = <0x32c0000 0x200000>;
163 label = "board_data";
164 reg = <0x34c0000 0x200000>;
170 reg = <0x36c0000 0x3600000>;