1 --- a/arch/arm/boot/dts/mt7629-rfb.dts
2 +++ b/arch/arm/boot/dts/mt7629-rfb.dts
6 stdout-path = "serial0:115200n8";
7 + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
16 + compatible = "mediatek,mt753x";
17 + mediatek,ethsys = <ðsys>;
18 + #address-cells = <1>;
23 device_type = "memory";
24 reg = <0x40000000 0x10000000>;
26 compatible = "mediatek,eth-mac";
28 phy-mode = "2500base-x";
30 + nvmem-cells = <&macaddr_factory_2a>;
31 + nvmem-cell-names = "mac-address";
41 + nvmem-cells = <&macaddr_factory_24>;
42 + nvmem-cell-names = "mac-address";
51 + mediatek,mdio = <&mdio>;
52 + mediatek,portmap = "llllw";
53 + mediatek,mdio_master_pinmux = <0>;
54 + reset-gpios = <&pio 28 0>;
55 + interrupt-parent = <&pio>;
56 + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
60 + compatible = "mediatek,mt753x-port";
71 pinctrl-names = "default";
72 pinctrl-0 = <&i2c_pins>;
74 pinctrl-0 = <&watchdog_pins>;
79 + compatible = "nvmem-cells";
80 + #address-cells = <1>;
83 + macaddr_factory_24: macaddr@24 {
87 + macaddr_factory_2a: macaddr@2a {