1 // SPDX-License-Identifier: GPL-2.0-or-later or MIT
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/gpio/gpio.h>
6 /include/ "fsl/p1020si-pre.dtsi"
8 model = "Enterasys WS-AP3710i";
9 compatible = "enterasys,ws-ap3710i";
12 led-boot = &led_power_green;
13 led-failsafe = &led_power_red;
14 led-running = &led_power_green;
15 led-upgrade = &led_power_red;
16 label-mac-device = &enet0;
20 device_type = "memory";
24 compatible = "gpio-leds";
27 gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
28 label = "ws-ap3710i:green:radio1";
29 linux,default-trigger = "phy0tpt";
33 gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
34 label = "ws-ap3710i:green:radio2";
35 linux,default-trigger = "phy1tpt";
38 led_power_green: power_green {
39 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
40 label = "ws-ap3710i:green:power";
43 led_power_red: power_red {
44 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
45 label = "ws-ap3710i:red:power";
50 compatible = "gpio-keys";
53 label = "Reset button";
54 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
59 lbc: localbus@ffe05000 {
60 reg = <0 0xffe05000 0 0x1000>;
61 ranges = <0x0 0x0 0x0 0xee000000 0x2000000>;
66 compatible = "cfi-flash";
67 reg = <0x0 0x0 0x2000000>;
72 compatible = "fixed-partitions";
77 compatible = "denx,fit";
78 reg = <0x0 0x1d80000>;
83 reg = <0x1d80000 0x80000>;
89 reg = <0x1e00000 0x100000>;
95 reg = <0x1f00000 0x20000>;
101 reg = <0x1f20000 0x20000>;
110 ranges = <0x0 0x0 0xffe00000 0x100000>;
112 gpio0: gpio-controller@fc00 {
116 phy4: ethernet-phy@4 {
118 reset-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
122 enet0: ethernet@b0000 {
123 phy-connection-type = "rgmii-id";
124 phy-handle = <&phy4>;
127 enet1: ethernet@b1000 {
131 enet2: ethernet@b2000 {
144 pci0: pcie@ffe09000 {
145 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
146 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
147 reg = <0 0xffe09000 0 0x1000>;
149 ranges = <0x2000000 0x0 0xa0000000
150 0x2000000 0x0 0xa0000000
159 pci1: pcie@ffe0a000 {
160 reg = <0 0xffe0a000 0 0x1000>;
161 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
162 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
164 ranges = <0x2000000 0x0 0x80000000
165 0x2000000 0x0 0x80000000
175 /include/ "fsl/p1020si-post.dtsi"