5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
10 model = "D-Link DAP-1522 A1";
13 led-status = &led_status;
17 compatible = "cfi-flash";
18 reg = <0xbc400000 0x800000>;
23 compatible = "fixed-partitions";
33 factory: partition@30000 {
35 reg = <0x30000 0x10000>;
41 reg = <0x40000 0x3a0000>;
47 compatible = "realtek,rtl8366s";
48 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
49 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
53 compatible = "gpio-keys-polled";
54 poll-interval = <100>;
58 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_RESTART>;
64 gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_WPS_BUTTON>;
70 gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
72 linux,input-type = <EV_SW>;
77 gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
79 linux,input-type = <EV_SW>;
84 compatible = "gpio-leds";
87 label = "dap-1522-a1:blue:wps";
88 gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
92 label = "dap-1522-a1:blue:ap";
93 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
97 label = "dap-1522-a1:red:sta";
98 gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
102 label = "dap-1522-a1:blue:status";
103 gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
117 state_default: pinctrl0 {
119 ralink,group = "i2c", "uartlite", "pci";
120 ralink,function = "gpio";
127 mtd-mac-address = <&factory 0x2004>;
130 mediatek,fixed-link = <1000 1 1 1>;
136 phy0: ethernet-phy@0 {
144 ralink,mtd-eeprom = <&factory 0x2000>;