target/linux/ramips/dts/DCS-930.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dcs-930", "ralink,rt3050-soc";
  10         model = "D-Link DCS-930";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x400000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 label = "firmware";
  50                                 reg = <0x50000 0x3b0000>;
  51                         };
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57
  58                 wifi {
  59                         label = "dcs-930:red:alert";
  60                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 led_status: status {
  64                         label = "dcs-930:green:status";
  65                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 wps {
  69                         label = "dcs-930:blue:wps";
  70                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  71                 };
  72         };
  73
  74         gpio-keys-polled {
  75                 compatible = "gpio-keys-polled";
  76                 poll-interval = <20>;
  77
  78                 wps {
  79                         label = "wps";
  80                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  81                         linux,code = <BTN_1>;
  82                 };
  83
  84                 reset {
  85                         label = "reset";
  86                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_RESTART>;
  88                 };
  89         };
  90 };
  91
  92 &pinctrl {
  93         state_default: pinctrl0 {
  94                 gpio {
  95                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  96                         ralink,function = "gpio";
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         mtd-mac-address = <&factory 0x4>;
 103 };
 104
 105 &esw {
 106         mediatek,portmap = <0x2f>;
 107 };
 108
 109 &wmac {
 110         ralink,mtd-eeprom = <&factory 0>;
 111 };
 112
 113 &otg {
 114         status = "okay";
 115 };