target/linux/ramips/dts/DWR-512-B.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dwr-512-b", "ralink,rt5350-soc";
  10         model = "D-Link DWR-512 B";
  11
  12         gpio-keys-polled {
  13                 compatible = "gpio-keys-polled";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17
  18                 wps {
  19                         label = "wps";
  20                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_WPS_BUTTON>;
  22                 };
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30
  31         gpio-leds {
  32                 compatible = "gpio-leds";
  33
  34                 sms {
  35                         label = "dwr-512-b:green:sms";
  36                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  37                 };
  38                 status {
  39                         label = "dwr-512-b:green:status";
  40                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  41                 };
  42                 2g {
  43                         label = "dwr-512-b:green:2g";
  44                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  45                 };
  46                 3g {
  47                         label = "dwr-512-b:green:3g";
  48                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  49                 };
  50                 sstrengthr {
  51                         label = "dwr-512-b:red:sigstrength";
  52                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  53                 };
  54                 sstrengthg {
  55                         label = "dwr-512-b:green:sigstrength";
  56                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  57                 };
  58         };
  59
  60         gpio-export {
  61                 compatible = "gpio-export";
  62                 #size-cells = <0>;
  63
  64                 slic_int {
  65                         gpio-export,name = "slic_int";
  66                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  67                 };
  68                 modem3g_enable {
  69                         gpio-export,name = "modem3g_enable";
  70                         gpio-export,output = <1>;
  71                         gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
  72                 };
  73         };
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         mx25l6405d@0 {
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0>;
  84                 spi-max-frequency = <30000000>;
  85                 m25p,fast-read;
  86
  87                 partition@0 {
  88                         label = "jboot";
  89                         reg = <0x0 0x10000>;
  90                         read-only;
  91                 };
  92
  93                 partition@10000 {
  94                         label = "firmware";
  95                         reg = <0x10000 0x7e0000>;
  96                 };
  97
  98                 config: partition@7f0000 {
  99                         label = "config";
 100                         reg = <0x7f0000 0x10000>;
 101                 };
 102         };
 103 };
 104
 105 &spi1 {
 106         status = "okay";
 107
 108         spidev@1 {
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111                 compatible = "siliconlabs,si3210";
 112
 113                 reg = <0>;
 114                 spi-max-frequency = <1000000>;
 115         };
 116 };
 117
 118 &pinctrl {
 119         state_default: pinctrl0 {
 120                 gpio {
 121                         ralink,group = "i2c", "jtag", "uartf";
 122                         ralink,function = "gpio";
 123                 };
 124         };
 125 };
 126
 127 &esw {
 128         mediatek,portmap = <0x2f>;
 129 };
 130
 131 &ethernet {
 132         mtd-mac-address = <&config 0xe07e>;
 133 };
 134
 135 &wmac {
 136         ralink,mtd-eeprom = <&config 0xe08a>;
 137         ralink,led-polarity = <1>;
 138         mtd-mac-address = <&config 0xe07e>;
 139 };