5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
11 compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
12 model = "Belkin F5D8235 v1";
15 led-boot = &led_wired_blue;
16 led-failsafe = &led_wired_blue;
20 compatible = "cfi-flash";
21 reg = <0xbc400000 0x800000>;
26 compatible = "fixed-partitions";
38 reg = <0x30000 0x10000>;
42 factory: partition@40000 {
44 reg = <0x40000 0x10000>;
50 reg = <0x50000 0x7b0000>;
56 compatible = "realtek,rtl8366s";
57 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
58 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
99 realtek,green-ethernet-features;
103 compatible = "gpio-keys-polled";
104 poll-interval = <100>;
108 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
109 linux,code = <KEY_WPS_BUTTON>;
114 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
115 linux,code = <KEY_RESTART>;
120 compatible = "gpio-leds";
123 label = "f5d8235-v1:blue:internet";
124 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
128 label = "f5d8235-v1:amber:internet";
129 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
133 label = "f5d8235-v1:blue:modem";
134 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
138 label = "f5d8235-v1:amber:modem";
139 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
143 label = "f5d8235-v1:blue:router";
144 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
148 label = "f5d8235-v1:blue:storage";
149 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
150 trigger-sources = <&ohci_port1>, <&ehci_port1>;
151 linux,default-trigger = "usbport";
155 label = "f5d8235-v1:amber:storage";
156 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
160 label = "f5d8235-v1:blue:security";
161 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
165 label = "f5d8235-v1:amber:security";
166 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
169 led_wired_blue: wired {
170 label = "f5d8235-v1:blue:wired";
171 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
175 label = "f5d8235-v1:amber:wired";
176 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
180 label = "f5d8235-v1:blue:wireless";
181 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
185 label = "f5d8235-v1:amber:wireless";
186 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
196 state_default: pinctrl0 {
198 ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite";
199 ralink,function = "gpio";
206 mtd-mac-address = <&factory 0x4>;
209 mediatek,fixed-link = <1000 1 1 1>;
217 #address-cells = <1>;
219 compatible = "pci1033,0035";
220 reg = <0x8800 0 0 0 0>;
224 #trigger-source-cells = <0>;
229 #address-cells = <1>;
231 compatible = "pci1033,00e0";
232 reg = <0x8900 0 0 0 0>;
236 #trigger-source-cells = <0>;
243 ralink,mtd-eeprom = <&factory 0x0>;