target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "fon,fonera20n", "ralink,rt3052-soc";
  10         model = "La Fonera 2.0N";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 label = "firmware";
  50                                 reg = <0x50000 0x7b0000>;
  51                         };
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57
  58                 wifi {
  59                         label = "fonera20n:orange:wifi";
  60                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 led_power: power {
  64                         label = "fonera20n:green:power";
  65                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 usb {
  69                         label = "fonera20n:orange:usb";
  70                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  71                         trigger-sources = <&otg_port1>;
  72                         linux,default-trigger = "usbport";
  73                 };
  74         };
  75
  76         gpio-keys-polled {
  77                 compatible = "gpio-keys-polled";
  78                 poll-interval = <20>;
  79
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_RESTART>;
  84                 };
  85
  86                 switch {
  87                         label = "switch";
  88                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_RFKILL>;
  90                         linux,input-type = <EV_SW>;
  91                 };
  92         };
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         mtd-mac-address = <&factory 0x28>;
 106 };
 107
 108 &esw {
 109         #address-cells = <1>;
 110         #size-cells = <0>;
 111
 112         mediatek,portmap = <0x2f>;
 113
 114         port@0 {
 115                 compatible = "swconfig,port";
 116                 reg = <0>;
 117                 swconfig,segment = "lan";
 118                 swconfig,portmap = <0 4>;
 119         };
 120
 121         port@1 {
 122                 compatible = "swconfig,port";
 123                 reg = <1>;
 124                 swconfig,segment = "lan";
 125                 swconfig,portmap = <1 3>;
 126         };
 127
 128         port@2 {
 129                 compatible = "swconfig,port";
 130                 reg = <2>;
 131                 swconfig,segment = "lan";
 132                 swconfig,portmap = <2 2>;
 133         };
 134
 135         port@3 {
 136                 compatible = "swconfig,port";
 137                 reg = <3>;
 138                 swconfig,segment = "lan";
 139                 swconfig,portmap = <3 1>;
 140         };
 141
 142         port@4 {
 143                 compatible = "swconfig,port";
 144                 reg = <4>;
 145                 swconfig,segment = "wan";
 146                 swconfig,portmap = <4 0>;
 147         };
 148 };
 149
 150 &wmac {
 151         ralink,mtd-eeprom = <&factory 0>;
 152 };
 153
 154 &otg {
 155         status = "okay";
 156 };