5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
10 model = "ARC FreeStation5";
13 bootargs = "console=ttyS0,115200";
17 compatible = "cfi-flash";
18 reg = <0x1f000000 0x800000>;
23 compatible = "fixed-partitions";
35 reg = <0x30000 0x10000>;
39 factory: partition@40000 {
41 reg = <0x40000 0x10000>;
47 reg = <0x50000 0x7b0000>;
53 compatible = "gpio-export";
56 * Used to enable power-over-ethernet passthrough from port0 to port1.
57 * Disable passthrough by default to prevent accidental equipment damage.
60 gpio-export,name = "poe-passthrough";
61 gpio-export,output = <1>;
62 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
67 compatible = "gpio-leds";
70 * The following leds are defined in the ArcOS firmware, but reportedly
71 * not present in the Freestation5 device.
74 label = "freestation5:unknown:wifi";
75 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
79 label = "freestation5:unknown:powerg";
80 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
84 label = "freestation5:unknown:usb";
85 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
91 state_default: pinctrl0 {
93 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
94 ralink,function = "gpio";
100 mtd-mac-address = <&factory 0x4>;
104 mediatek,portmap = <0x01>;
108 ralink,mtd-eeprom = <&factory 0>;