target/linux/ramips/dts/MT7628.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
   7         model = "Mediatek MT7628AN evaluation board";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x2000000>;
  12         };
  13 };
  14
  15 &pinctrl {
  16         state_default: pinctrl0 {
  17                 gpio {
  18                         ralink,group = "i2c", "jtag";
  19                         ralink,function = "gpio";
  20                 };
  21         };
  22 };
  23
  24 &wmac {
  25         status = "okay";
  26 };
  27
  28 &spi0 {
  29         status = "okay";
  30
  31         m25p80@0 {
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34                 compatible = "jedec,spi-nor";
  35                 reg = <0 0>;
  36                 linux,modalias = "m25p80", "en25q64";
  37                 spi-max-frequency = <10000000>;
  38                 m25p,chunked-io = <32>;
  39
  40                 partition@0 {
  41                         label = "u-boot";
  42                         reg = <0x0 0x30000>;
  43                         read-only;
  44                 };
  45
  46                 partition@30000 {
  47                         label = "u-boot-env";
  48                         reg = <0x30000 0x10000>;
  49                         read-only;
  50                 };
  51
  52                 factory: partition@40000 {
  53                         label = "factory";
  54                         reg = <0x40000 0x10000>;
  55                         read-only;
  56                 };
  57
  58                 partition@50000 {
  59                         label = "firmware";
  60                         reg = <0x50000 0x7b0000>;
  61                 };
  62         };
  63 };
  64
  65 &wmac {
  66         status = "okay";
  67 };