5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
13 led-status = &led_blue;
17 device_type = "memory";
18 reg = <0x0 0x10000000>;
22 bootargs = "console=ttyS0,115200";
26 compatible = "gpio-leds";
29 label = "newifi-d1:red:status";
30 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
34 label = "newifi-d1:green:status";
35 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
38 led_blue: status-blue {
39 label = "newifi-d1:blue:status";
40 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-keys-polled";
50 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_RESTART>;
56 compatible = "gpio-export";
60 gpio-export,name = "usb2power";
61 gpio-export,output = <1>;
62 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
66 gpio-export,name = "usb3power";
67 gpio-export,output = <1>;
68 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&sdhci_pins>;
86 compatible = "jedec,spi-nor";
88 spi-max-frequency = <10000000>;
89 m25p,chunked-io = <32>;
99 reg = <0x30000 0x10000>;
103 factory: partition@40000 {
105 reg = <0x40000 0x10000>;
111 reg = <0x50000 0x1fb0000>;
122 reg = <0x0000 0 0 0 0>;
123 mediatek,mtd-eeprom = <&factory 0x8000>;
124 ieee80211-freq-limit = <5000000 6000000>;
130 reg = <0x0000 0 0 0 0>;
131 mediatek,mtd-eeprom = <&factory 0x0000>;
136 mtd-mac-address = <&factory 0xe000>;
140 state_default: pinctrl0 {
142 ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
143 ralink,function = "gpio";