5 #include <dt-bindings/input/input.h>
8 compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
12 device_type = "memory";
13 reg = <0x0 0x10000000>;
17 bootargs = "console=ttyS0,115200";
21 compatible = "gpio-leds";
24 label = "newifi-d1:red:status";
25 gpios = <&gpio0 14 1>;
29 label = "newifi-d1:green:status";
30 gpios = <&gpio0 13 1>;
34 label = "newifi-d1:blue:status";
35 gpios = <&gpio0 16 1>;
40 compatible = "gpio-keys-polled";
47 gpios = <&gpio0 15 1>;
48 linux,code = <KEY_RESTART>;
53 compatible = "gpio-export";
57 gpio-export,name = "usb2power";
58 gpio-export,output = <1>;
63 gpio-export,name = "usb3power";
64 gpio-export,output = <1>;
65 gpios = <&gpio0 11 0>;
72 pinctrl-names = "default";
73 pinctrl-0 = <&sdhci_pins>;
86 compatible = "jedec,spi-nor";
88 linux,modalias = "m25p80";
89 spi-max-frequency = <10000000>;
99 reg = <0x30000 0x10000>;
103 factory: partition@40000 {
105 reg = <0x40000 0x10000>;
111 reg = <0x50000 0x2000000>;
121 reg = <0x0000 0 0 0 0>;
123 mediatek,mtd-eeprom = <&factory 0x8000>;
130 reg = <0x0000 0 0 0 0>;
132 mediatek,mtd-eeprom = <&factory 0x0000>;
139 mtd-mac-address = <&factory 0xe000>;
145 state_default: pinctrl0 {
147 ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
148 ralink,function = "gpio";