5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
13 led-status = &led_sys;
17 device_type = "memory";
18 reg = <0x0 0x10000000>;
22 bootargs = "console=ttyS0,115200";
25 palmbus: palmbus@1E000000 {
31 compatible = "nxp,pcf8563";
38 compatible = "gpio-leds";
41 label = "pbr-m1:blue:power";
42 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
47 label = "pbr-m1:blue:sys";
48 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
52 label = "pbr-m1:blue:internet";
53 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
57 label = "pbr-m1:blue:wlan2g";
58 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
62 label = "pbr-m1:blue:wlan5g";
63 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
68 compatible = "gpio-keys-polled";
73 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
74 linux,code = <KEY_RESTART>;
79 compatible = "gpio-export";
83 gpio-export,name = "power_usb2";
84 gpio-export,output = <1>;
85 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
89 gpio-export,name = "power_usb3";
90 gpio-export,output = <1>;
91 gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
95 gpio-export,name = "power_sata";
96 gpio-export,output = <1>;
97 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
102 compatible = "gpio-beeper";
103 gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&sdhci_pins>;
117 compatible = "jedec,spi-nor";
119 spi-max-frequency = <10000000>;
120 m25p,chunked-io = <32>;
123 compatible = "fixed-partitions";
124 #address-cells = <1>;
134 label = "u-boot-env";
135 reg = <0x30000 0x10000>;
139 factory: partition@40000 {
141 reg = <0x40000 0x10000>;
147 reg = <0x50000 0xfb0000>;
159 reg = <0x0000 0 0 0 0>;
160 mediatek,mtd-eeprom = <&factory 0x8000>;
161 ieee80211-freq-limit = <5000000 6000000>;
167 reg = <0x0000 0 0 0 0>;
168 mediatek,mtd-eeprom = <&factory 0x0000>;
173 mtd-mac-address = <&factory 0xe000>;
177 state_default: pinctrl0 {
179 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
180 ralink,function = "gpio";