5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "asus,rt-n56u", "ralink,rt3883-soc";
10 model = "Asus RT-N56U";
13 led-status = &led_power;
17 compatible = "cfi-flash";
18 reg = <0x1c000000 0x800000>;
24 reg = <0x0 0x0030000>;
30 reg = <0x00030000 0x00010000>;
35 factory: partition@40000 {
36 reg = <0x00040000 0x00010000>;
42 reg = <0x00050000 0x007b0000>;
48 compatible = "realtek,rtl8367";
49 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
50 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
51 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
55 compatible = "gpio-keys-polled";
56 poll-interval = <100>;
60 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_RESTART>;
66 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_WPS_BUTTON>;
72 compatible = "gpio-leds";
75 label = "rt-n56u:blue:power";
76 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
80 label = "rt-n56u:blue:lan";
81 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
85 label = "rt-n56u:blue:wan";
86 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
90 label = "rt-n56u:blue:usb";
91 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
101 state_default: pinctrl0 {
103 ralink,group = "spi", "i2c", "jtag", "uartf";
104 ralink,function = "gpio";
110 mtd-mac-address = <&factory 0x4>;
113 mediatek,fixed-link = <1000 1 1 1>;
125 compatible = "pci1814,3091";
126 reg = <0x10000 0 0 0 0>;
127 ralink,mtd-eeprom = <&factory 0x8000>;
134 ralink,mtd-eeprom = <&factory 0>;