3 #include "TPLINK-8M.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
10 model = "TP-Link TL-WR902AC v3";
13 led-status = &led_power;
17 compatible = "gpio-keys-polled";
22 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
23 linux,code = <KEY_RESTART>;
28 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
34 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
40 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_WPS_BUTTON>;
46 compatible = "gpio-leds";
49 label = "tl-wr902ac-v3:green:lan";
50 gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
54 label = "tl-wr902ac-v3:green:power";
55 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
59 label = "tl-wr902ac-v3:green:usb";
60 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
64 label = "tl-wr902ac-v3:green:wan";
65 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
69 label = "tl-wr902ac-v3:green:wlan";
70 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
74 label = "tl-wr902ac-v3:green:wps";
75 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
81 state_default: pinctrl0 {
83 ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
84 ralink,function = "gpio";
103 reg = <0x0000 0 0 0 0>;
104 mediatek,mtd-eeprom = <&factory 0x28000>;
105 ieee80211-freq-limit = <5000000 6000000>;
106 mtd-mac-address = <&factory 0xf100>;
107 mtd-mac-address-increment = <(-1)>;