5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
10 model = "Asus WL-330N3G";
13 led-status = &led_power;
17 compatible = "gpio-leds";
20 label = "wl-330n3g:blue:3g";
21 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
25 label = "wl-330n3g:red:3g";
26 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
30 label = "wl-330n3g:blue:power";
31 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
36 compatible = "gpio-keys-polled";
41 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RESTART>;
47 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
59 compatible = "jedec,spi-nor";
61 spi-max-frequency = <10000000>;
71 reg = <0x30000 0x10000>;
75 factory: partition@40000 {
77 reg = <0x40000 0x10000>;
83 reg = <0x50000 0x3b0000>;
89 state_default: pinctrl0 {
91 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
92 ralink,function = "gpio";
98 mtd-mac-address = <&factory 0x4>;
102 mediatek,portmap = <0x3e>;
106 ralink,mtd-eeprom = <&factory 0>;