ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
[openwrt/openwrt.git] / target / linux / ramips / dts / WSR-1166.dts
1 /dts-v1/;
2
3 /include/ "mt7621.dtsi"
4
5 / {
6 compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
7 model = "Buffalo WSR-1166DHP";
8
9 memory@0 {
10 device_type = "memory";
11 reg = <0x0 0x8000000>;
12 };
13
14 chosen {
15 bootargs = "console=ttyS0,57600";
16 };
17
18 palmbus@1E000000 {
19 spi@b00 {
20 status = "okay";
21
22 m25p80@0 {
23 #address-cells = <1>;
24 #size-cells = <1>;
25 compatible = "mx25l12805d";
26 reg = <0 0>;
27 linux,modalias = "m25p80";
28 spi-max-frequency = <10000000>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 label = "firmware";
50 reg = <0x50000 0xf90000>;
51 };
52
53 partition@fe00000 {
54 label = "board_data";
55 reg = <0xfe0000 0x10000>;
56 };
57 };
58 };
59 };
60
61 pinctrl {
62 state_default: pinctrl0 {
63 gpio {
64 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
65 ralink,function = "gpio";
66 };
67 };
68 };
69
70 gpio-leds {
71 compatible = "gpio-leds";
72 internet_g {
73 label = "buffalo:green:internet";
74 gpios = <&gpio1 9 1>;
75 };
76 router_g {
77 label = "buffalo:green:router";
78 gpios = <&gpio1 10 1>;
79 };
80 router_o {
81 label = "buffalo:orange:router";
82 gpios = <&gpio1 11 1>;
83 };
84 internet_o {
85 label = "buffalo:orange:internet";
86 gpios = <&gpio1 12 1>;
87 };
88 wifi_o {
89 label = "buffalo:orange:wifi";
90 gpios = <&gpio1 13 1>;
91 };
92 power {
93 label = "buffalo:green:power";
94 gpios = <&gpio1 14 1>;
95 };
96 diag {
97 label = "buffalo:orange:diag";
98 gpios = <&gpio1 15 1>;
99 };
100 wifi_g {
101 label = "buffalo:green:wifi";
102 gpios = <&gpio1 16 1>;
103 };
104 };
105
106 gpio-keys-polled {
107 compatible = "gpio-keys-polled";
108 #address-cells = <1>;
109 #size-cells = <0>;
110 poll-interval = <20>;
111 power {
112 label = "power";
113 gpios = <&gpio0 18 1>;
114 linux,code = <0x74>;
115 };
116 reset {
117 label = "reset";
118 gpios = <&gpio0 3 1>;
119 linux,code = <0x198>;
120 };
121 aoss {
122 label = "aoss";
123 gpios = <&gpio0 6 1>;
124 linux,code = <0x211>;
125 };
126 auto {
127 label = "mode";
128 gpios = <&gpio0 7 0>;
129 linux,code = <0x100>;
130 linux,input-type = <5>; /* EV_SW */
131 };
132 ap {
133 label = "ap";
134 gpios = <&gpio0 10 0>;
135 linux,code = <0x100>;
136 linux,input-type = <5>; /* EV_SW */
137 };
138 router {
139 label = "router";
140 gpios = <&gpio0 12 0>;
141 linux,code = <0x100>;
142 linux,input-type = <5>; /* EV_SW */
143 };
144 };
145
146 gpio_poweroff {
147 compatible = "gpio-poweroff";
148 gpios = <&gpio0 0 1>;
149 };
150
151 pcie@1e140000 {
152 status = "okay";
153
154 pcie0 {
155 mt76@0,0 {
156 reg = <0x0000 0 0 0 0>;
157 device_type = "pci";
158 mediatek,mtd-eeprom = <&factory 0x8000>;
159 mediatek,2ghz = <0>;
160 };
161 };
162
163 pcie1 {
164 mt76@1,0 {
165 reg = <0x0000 0 0 0 0>;
166 device_type = "pci";
167 mediatek,mtd-eeprom = <&factory 0x0000>;
168 mediatek,5ghz = <0>;
169 };
170 };
171 };
172 };