1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "mt7620a.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
10 model = "I-O DATA WN-AC733GR3";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-leds";
23 label = "green:power";
24 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
29 label = "green:notification";
30 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
34 label = "green:wlan2g";
35 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
39 label = "green:wlan5g";
40 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-keys";
49 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
55 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
56 linux,code = <KEY_WPS_BUTTON>;
61 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
63 linux,input-type = <EV_SW>;
68 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
70 linux,input-type = <EV_SW>;
75 compatible = "realtek,rtl8367b";
76 gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
77 gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
78 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
86 compatible = "jedec,spi-nor";
88 spi-max-frequency = <10000000>;
91 compatible = "fixed-partitions";
102 label = "u-boot-env";
103 reg = <0x30000 0x10000>;
107 factory: partition@40000 {
109 reg = <0x40000 0x8000>;
113 compatible = "fixed-layout";
114 #address-cells = <1>;
117 eeprom_factory_0: eeprom@0 {
121 macaddr_factory_4: macaddr@4 {
127 iNIC_rf: partition@48000 {
129 reg = <0x48000 0x8000>;
133 compatible = "fixed-layout";
134 #address-cells = <1>;
137 eeprom_iNIC_rf_0: eeprom@0 {
144 compatible = "denx,uimage";
146 reg = <0x50000 0x6d4000>;
150 label = "manufacture";
151 reg = <0x724000 0x8c000>;
157 reg = <0x7b0000 0x10000>;
163 reg = <0x7c0000 0x40000>;
171 pinctrl-names = "default";
172 pinctrl-0 = <&rgmii1_pins>;
174 nvmem-cells = <&macaddr_factory_4>;
175 nvmem-cell-names = "mac-address";
179 mediatek,fixed-link = <1000 1 1 1>;
187 gpios = <0 GPIO_ACTIVE_HIGH>;
189 line-name = "rtl8367rb-reset";
195 groups = "i2c", "uartf", "mdio";
206 compatible = "mediatek,mt76";
207 reg = <0x0000 0 0 0 0>;
208 nvmem-cells = <&eeprom_iNIC_rf_0>;
209 nvmem-cell-names = "eeprom";
210 ieee80211-freq-limit = <5000000 6000000>;
215 nvmem-cells = <&eeprom_factory_0>;
216 nvmem-cell-names = "eeprom";