1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
8 model = "Planex CS-QR10";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-leds";
22 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
27 compatible = "gpio-keys";
31 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_RESTART>;
37 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_WPS_BUTTON>;
53 pinctrl-names = "default";
54 pinctrl-0 = <&pcm_i2s_pins>;
61 compatible = "jedec,spi-nor";
63 spi-max-frequency = <10000000>;
66 compatible = "fixed-partitions";
78 reg = <0x30000 0x10000>;
82 factory: partition@40000 {
84 reg = <0x40000 0x10000>;
88 compatible = "fixed-layout";
92 eeprom_factory_0: eeprom@0 {
96 macaddr_factory_4: macaddr@4 {
103 compatible = "denx,uimage";
105 reg = <0x50000 0x7b0000>;
121 groups = "spi refclk", "rgmii1";
126 function = "wdt refclk";
131 pinctrl-names = "default";
132 pinctrl-0 = <&ephy_pins>;
134 nvmem-cells = <&macaddr_factory_4>;
135 nvmem-cell-names = "mac-address";
137 mediatek,portmap = "llllw";
153 nvmem-cells = <&eeprom_factory_0>;
154 nvmem-cell-names = "eeprom";