1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
8 model = "Zbtlink ZBT-APE522II";
11 bootargs = "console=ttyS0,115200";
15 compatible = "gpio-leds";
19 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
24 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
29 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
34 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
38 label = "green:wlan2g4";
39 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
44 compatible = "gpio-keys";
48 gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
49 linux,code = <KEY_RESTART>;
62 compatible = "jedec,spi-nor";
64 spi-max-frequency = <10000000>;
67 compatible = "fixed-partitions";
78 reg = <0x30000 0x10000>;
82 factory: partition@40000 {
84 reg = <0x40000 0x10000>;
89 compatible = "denx,uimage";
91 reg = <0x50000 0xf80000>;
98 pinctrl-names = "default";
99 pinctrl-0 = <&ephy_pins>;
101 nvmem-cells = <&macaddr_factory_4>;
102 nvmem-cell-names = "mac-address";
104 mediatek,portmap = "llllw";
108 ralink,mtd-eeprom = <&factory 0x0>;
110 pinctrl-names = "default", "pa_gpio";
111 pinctrl-0 = <&pa_pins>;
112 pinctrl-1 = <&pa_gpio_pins>;
121 reg = <0x0000 0 0 0 0>;
122 mediatek,mtd-eeprom = <&factory 0x8000>;
123 ieee80211-freq-limit = <5000000 6000000>;
129 groups = "wled", "i2c", "uartf", "wdt";
135 compatible = "nvmem-cells";
136 #address-cells = <1>;
139 macaddr_factory_4: macaddr@4 {