5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "afoundry,ew1200", "mediatek,mt7621-soc";
14 led-failsafe = &led_run;
15 led-running = &led_run;
16 led-upgrade = &led_run;
20 bootargs = "console=ttyS0,57600";
24 compatible = "gpio-keys";
28 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RESTART>;
34 compatible = "gpio-leds";
37 label = "ew1200:green:run";
38 gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
42 label = "ew1200:green:usb";
43 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
44 trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
45 linux,default-trigger = "usbport";
58 compatible = "jedec,spi-nor";
60 spi-max-frequency = <10000000>;
63 compatible = "fixed-partitions";
75 reg = <0x30000 0x10000>;
79 factory: partition@40000 {
81 reg = <0x40000 0x10000>;
86 compatible = "denx,uimage";
88 reg = <0x50000 0xfb0000>;
100 reg = <0x0000 0 0 0 0>;
101 mediatek,mtd-eeprom = <&factory 0x8000>;
102 ieee80211-freq-limit = <5000000 6000000>;
108 reg = <0x0000 0 0 0 0>;
109 mediatek,mtd-eeprom = <&factory 0x0000>;
110 ieee80211-freq-limit = <2400000 2500000>;
115 mtd-mac-address = <&factory 0xe000>;
143 mtd-mac-address = <&factory 0xe000>;
144 mtd-mac-address-increment = <1>;
151 groups = "i2c", "uart3", "wdt";