1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
17 compatible = "gpio-keys";
21 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
22 linux,code = <KEY_RESTART>;
27 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
28 linux,code = <KEY_WPS_BUTTON>;
33 compatible = "gpio-leds";
36 label = "rt-ac85p:blue:power";
37 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
40 label = "rt-ac85p:blue:wlan2g";
41 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
42 linux,default-trigger = "phy0radio";
46 label = "rt-ac85p:blue:wlan5g";
47 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
48 linux,default-trigger = "phy1radio";
65 compatible = "fixed-partitions";
77 reg = <0xe0000 0x100000>;
81 factory: partition@1e0000 {
83 reg = <0x1e0000 0x100000>;
87 factory2: partition@2e0000 {
89 reg = <0x2e0000 0x100000>;
95 reg = <0x3e0000 0x400000>;
100 reg = <0x7e0000 0x2e00000>;
105 reg = <0x35e0000 0x3200000>;
116 compatible = "pci14c3,7615";
117 reg = <0x0000 0 0 0 0>;
118 mediatek,mtd-eeprom = <&factory 0x0000>;
119 ieee80211-freq-limit = <2400000 2500000>;
125 compatible = "pci14c3,7615";
126 reg = <0x0000 0 0 0 0>;
127 mediatek,mtd-eeprom = <&factory 0x8000>;
128 ieee80211-freq-limit = <5000000 6000000>;
133 mtd-mac-address = <&factory 0xe000>;
167 groups = "uart2", "uart3", "i2c";