1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 compatible = "beeline,smartbox-giga", "mediatek,mt7621-soc";
11 model = "Beeline SmartBox GIGA";
14 label-mac-device = &gmac0;
16 led-boot = &led_status_green;
17 led-failsafe = &led_status_red;
18 led-running = &led_status_green;
19 led-upgrade = &led_status_red;
23 compatible = "gpio-leds";
25 led_status_green: led-0 {
26 label = "green:status";
27 color = <LED_COLOR_ID_GREEN>;
28 function = LED_FUNCTION_STATUS;
29 gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
34 color = <LED_COLOR_ID_BLUE>;
35 function = LED_FUNCTION_WAN;
36 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
39 led_status_red: led-2 {
41 color = <LED_COLOR_ID_RED>;
42 function = LED_FUNCTION_STATUS;
43 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
48 compatible = "gpio-keys";
52 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_RESTART>;
58 compatible = "mtd-concat";
59 devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
63 compatible = "fixed-partitions";
69 reg = <0x0 0x5400000>;
79 compatible = "sercomm,sc-partitions", "fixed-partitions";
86 sercomm,scpart-id = <0>;
91 label = "dynamic partition map";
92 reg = <0x100000 0x100000>;
93 sercomm,scpart-id = <1>;
96 factory: partition@200000 {
97 compatible = "nvmem-cells";
99 reg = <0x200000 0x100000>;
100 #address-cells = <1>;
102 sercomm,scpart-id = <2>;
105 eeprom_factory_0: eeprom@0 {
109 eeprom_factory_8000: eeprom@8000 {
110 reg = <0x8000 0x4da8>;
113 macaddr_factory_21000: macaddr@21000 {
120 reg = <0x300000 0x100000>;
121 sercomm,scpart-id = <3>;
126 reg = <0x400000 0x600000>;
127 sercomm,scpart-id = <4>;
132 reg = <0xa00000 0x600000>;
133 sercomm,scpart-id = <5>;
137 ubiconcat0: partition@1000000 {
138 label = "File System 1";
139 reg = <0x1000000 0x1800000>;
140 sercomm,scpart-id = <6>;
144 label = "File System 2";
145 reg = <0x2800000 0x1800000>;
146 sercomm,scpart-id = <7>;
150 ubiconcat1: partition@4000000 {
151 label = "Configuration/log";
152 reg = <0x4000000 0x800000>;
153 sercomm,scpart-id = <8>;
156 ubiconcat2: partition@4800000 {
157 label = "application tmp buffer (Ftool)";
158 reg = <0x4800000 0xc00000>;
159 sercomm,scpart-id = <9>;
162 ubiconcat3: partition@5400000 {
164 reg = <0x5400000 0x2800000>;
165 sercomm,scpart-id = <10>;
169 label = "bad block reserved";
170 reg = <0x7c00000 0x380000>;
171 sercomm,scpart-id = <11>;
183 compatible = "mediatek,mt76";
184 reg = <0x0000 0 0 0 0>;
185 ieee80211-freq-limit = <5000000 6000000>;
187 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_21000>;
188 nvmem-cell-names = "eeprom", "mac-address";
189 mac-address-increment = <(5)>;
195 compatible = "mediatek,mt76";
196 reg = <0x0000 0 0 0 0>;
197 ieee80211-freq-limit = <2400000 2500000>;
199 nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_21000>;
200 nvmem-cell-names = "eeprom", "mac-address";
201 mac-address-increment = <(4)>;
206 nvmem-cells = <&macaddr_factory_21000>;
207 nvmem-cell-names = "mac-address";
213 phy-handle = <ðphy0>;
215 nvmem-cells = <&macaddr_factory_21000>;
216 nvmem-cell-names = "mac-address";
217 mac-address-increment = <(1)>;
221 ethphy0: ethernet-phy@0 {
246 groups = "i2c", "jtag";