target/linux/ramips/dts/mt7621_buffalo_wsr-1166dhp.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
   8         model = "Buffalo WSR-1166DHP";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 internet_g {
  21                         label = "green:internet";
  22                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 router_g {
  26                         label = "green:router";
  27                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 router_o {
  31                         label = "orange:router";
  32                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 internet_o {
  36                         label = "orange:internet";
  37                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wifi_o {
  41                         label = "orange:wifi";
  42                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 led_power: power {
  46                         label = "green:power";
  47                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 diag {
  51                         label = "orange:diag";
  52                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wifi_g {
  56                         label = "green:wifi";
  57                         gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         keys {
  62                 compatible = "gpio-keys";
  63
  64                 power {
  65                         label = "power";
  66                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_POWER>;
  68                 };
  69
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RESTART>;
  74                 };
  75
  76                 aoss {
  77                         label = "aoss";
  78                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                 };
  81
  82                 auto {
  83                         label = "mode";
  84                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  85                         linux,code = <BTN_0>;
  86                         linux,input-type = <EV_SW>;
  87                 };
  88
  89                 ap {
  90                         label = "ap";
  91                         gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
  92                         linux,code = <BTN_0>;
  93                         linux,input-type = <EV_SW>;
  94                 };
  95
  96                 router {
  97                         label = "router";
  98                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  99                         linux,code = <BTN_0>;
 100                         linux,input-type = <EV_SW>;
 101                 };
 102         };
 103
 104         gpio_poweroff {
 105                 compatible = "gpio-poweroff";
 106                 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 107         };
 108 };
 109
 110 &spi0 {
 111         status = "okay";
 112
 113         flash@0 {
 114                 compatible = "jedec,spi-nor";
 115                 reg = <0>;
 116                 spi-max-frequency = <10000000>;
 117
 118                 partitions {
 119                         compatible = "fixed-partitions";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122
 123                         partition@0 {
 124                                 label = "u-boot";
 125                                 reg = <0x0 0x30000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@30000 {
 130                                 label = "u-boot-env";
 131                                 reg = <0x30000 0x10000>;
 132                                 read-only;
 133                         };
 134
 135                         factory: partition@40000 {
 136                                 compatible = "nvmem-cells";
 137                                 label = "factory";
 138                                 reg = <0x40000 0x10000>;
 139                                 #address-cells = <1>;
 140                                 #size-cells = <1>;
 141                                 read-only;
 142
 143                                 eeprom_factory_0: eeprom@0 {
 144                                         reg = <0x0 0x400>;
 145                                 };
 146                         };
 147
 148                         partition@50000 {
 149                                 compatible = "openwrt,trx";
 150                                 label = "firmware";
 151                                 reg = <0x50000 0xf90000>;
 152                         };
 153
 154                         partition@fe0000 {
 155                                 label = "board_data";
 156                                 reg = <0xfe0000 0x20000>;
 157                         };
 158                 };
 159         };
 160 };
 161
 162 &gmac1 {
 163         status = "okay";
 164         label = "wan";
 165         phy-handle = <&ethphy4>;
 166 };
 167
 168 &mdio {
 169         ethphy4: ethernet-phy@4 {
 170                 reg = <4>;
 171         };
 172 };
 173
 174 &switch0 {
 175         ports {
 176                 port@0 {
 177                         status = "okay";
 178                         label = "lan1";
 179                 };
 180
 181                 port@1 {
 182                         status = "okay";
 183                         label = "lan2";
 184                 };
 185
 186                 port@2 {
 187                         status = "okay";
 188                         label = "lan3";
 189                 };
 190
 191                 port@3 {
 192                         status = "okay";
 193                         label = "lan4";
 194                 };
 195         };
 196 };
 197
 198 &state_default {
 199         gpio {
 200                 groups = "i2c", "uart2", "uart3", "sdhci";
 201                 function = "gpio";
 202         };
 203 };
 204
 205 &pcie {
 206         status = "okay";
 207 };
 208
 209 &pcie0 {
 210         mt76@0,0 {
 211                 reg = <0x0000 0 0 0 0>;
 212                 mediatek,mtd-eeprom = <&factory 0x8000>;
 213                 ieee80211-freq-limit = <5000000 6000000>;
 214         };
 215 };
 216
 217 &pcie1 {
 218         mt76@0,0 {
 219                 reg = <0x0000 0 0 0 0>;
 220                 nvmem-cells = <&eeprom_factory_0>;
 221                 nvmem-cell-names = "eeprom";
 222         };
 223 };
 224
 225 &xhci {
 226         status = "disabled";
 227 };