3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
12 led-failsafe = &led_sys;
13 led-running = &led_sys;
14 led-upgrade = &led_sys;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
25 label = "pbr-m1:blue:power";
26 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
31 label = "pbr-m1:blue:sys";
32 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
36 label = "pbr-m1:blue:internet";
37 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
41 label = "pbr-m1:blue:wlan2g";
42 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
46 label = "pbr-m1:blue:wlan5g";
47 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
52 compatible = "gpio-keys";
56 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_RESTART>;
62 compatible = "gpio-export";
66 gpio-export,name = "power_usb2";
67 gpio-export,output = <1>;
68 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
72 gpio-export,name = "power_usb3";
73 gpio-export,output = <1>;
74 gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
78 gpio-export,name = "power_sata";
79 gpio-export,output = <1>;
80 gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
85 compatible = "gpio-beeper";
86 gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
95 compatible = "nxp,pcf8563";
108 compatible = "jedec,spi-nor";
110 spi-max-frequency = <50000000>;
115 compatible = "fixed-partitions";
116 #address-cells = <1>;
126 label = "u-boot-env";
127 reg = <0x30000 0x10000>;
131 factory: partition@40000 {
133 reg = <0x40000 0x10000>;
138 compatible = "denx,uimage";
140 reg = <0x50000 0x1fb0000>;
147 uart3_gpio: uart3-gpio {
157 pinctrl-0 = <&pcie_pins>, <&uart3_gpio>;
158 reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
159 <&gpio 7 GPIO_ACTIVE_LOW>;
164 reg = <0x0000 0 0 0 0>;
165 mediatek,mtd-eeprom = <&factory 0x8000>;
166 ieee80211-freq-limit = <5000000 6000000>;
172 reg = <0x0000 0 0 0 0>;
173 mediatek,mtd-eeprom = <&factory 0x0000>;
178 mtd-mac-address = <&factory 0xe000>;
206 mtd-mac-address = <&factory 0xe006>;
213 groups = "wdt", "rgmii2", "jtag";