1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
11 label-mac-device = &gmac1;
12 led-boot = &led_status_red;
13 led-failsafe = &led_status_blue;
14 led-running = &led_status_green;
15 led-upgrade = &led_status_blue;
19 bootargs = "console=ttyS0,115200";
20 bootargs-override = "console=ttyS0,115200";
24 compatible = "gpio-keys";
28 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RESTART>;
34 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_WPS_BUTTON>;
40 compatible = "gpio-leds";
42 led_status_blue: led-0 {
43 label = "blue:status";
44 color = <LED_COLOR_ID_BLUE>;
45 function = LED_FUNCTION_STATUS;
46 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
49 led_status_green: led-1 {
50 label = "green:status";
51 color = <LED_COLOR_ID_GREEN>;
52 function = LED_FUNCTION_STATUS;
53 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
56 led_status_red: led-2 {
58 color = <LED_COLOR_ID_RED>;
59 function = LED_FUNCTION_STATUS;
60 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
66 nvmem-cells = <&macaddr_factory_8004>;
67 nvmem-cell-names = "mac-address";
73 phy-handle = <ðphy4>;
75 nvmem-cells = <&macaddr_factory_8004>;
76 nvmem-cell-names = "mac-address";
77 mac-address-increment = <(-3)>;
81 ethphy4: ethernet-phy@4 {
90 compatible = "fixed-partitions";
96 reg = <0x0000000 0x0080000>;
101 label = "u-boot-env";
102 reg = <0x0080000 0x0080000>;
105 factory: partition@100000 {
106 compatible = "nvmem-cells";
108 reg = <0x0100000 0x0080000>;
109 #address-cells = <1>;
113 eeprom_factory_0: eeprom@0 {
117 macaddr_factory_8004: macaddr@8004 {
124 reg = <0x0180000 0x7a80000>;
126 compatible = "fixed-partitions";
127 #address-cells = <1>;
132 reg = <0x0000000 0x0400000>;
137 reg = <0x0400000 0x7680000>;
141 /* last 128KiB *32 is reserved for bad blocks management */
151 compatible = "mediatek,mt76";
152 reg = <0x0000 0 0 0 0>;
153 nvmem-cells = <&eeprom_factory_0>;
154 nvmem-cell-names = "eeprom";
155 mediatek,disable-radar-background;
161 groups = "i2c", "uart3", "wdt";