3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "hiwifi,hc5962", "mediatek,mt7621-soc";
8 model = "HiWiFi HC5962";
11 led-boot = &led_system;
12 led-failsafe = &led_system;
13 led-running = &led_status;
14 led-upgrade = &led_status;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
25 label = "white:status";
26 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
37 compatible = "gpio-keys";
41 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
42 linux,code = <KEY_RESTART>;
47 compatible = "mtd-concat";
48 devices = <&ubiconcat0 &ubiconcat1>;
51 compatible = "fixed-partitions";
57 reg = <0x0 0x79c0000>;
67 compatible = "fixed-partitions";
79 reg = <0x80000 0x80000>;
83 factory: partition@100000 {
85 reg = <0x100000 0x40000>;
89 compatible = "fixed-layout";
93 eeprom_factory_0: eeprom@0 {
97 eeprom_factory_8000: eeprom@8000 {
105 reg = <0x140000 0x400000>;
108 ubiconcat0: partition@540000 {
109 label = "ubiconcat0";
110 reg = <0x540000 0x1c80000>;
115 reg = <0x21c0000 0x80000>;
119 ubiconcat1: partition@2240000 {
120 label = "ubiconcat1";
121 reg = <0x2240000 0x5d40000>;
132 reg = <0x0000 0 0 0 0>;
133 nvmem-cells = <&eeprom_factory_0>;
134 nvmem-cell-names = "eeprom";
135 ieee80211-freq-limit = <2400000 2500000>;
141 reg = <0x0000 0 0 0 0>;
142 nvmem-cells = <&eeprom_factory_8000>;
143 nvmem-cell-names = "eeprom";
144 ieee80211-freq-limit = <5000000 6000000>;
151 phy-handle = <ðphy4>;
155 ethphy4: ethernet-phy@4 {
181 groups = "uart3", "jtag";