3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "hiwifi,hc5962", "mediatek,mt7621-soc";
8 model = "HiWiFi HC5962";
11 led-boot = &led_system;
12 led-failsafe = &led_system;
13 led-running = &led_status;
14 led-upgrade = &led_status;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
25 label = "white:status";
26 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
37 compatible = "gpio-keys";
41 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
42 linux,code = <KEY_RESTART>;
47 compatible = "mtd-concat";
48 devices = <&ubiconcat0 &ubiconcat1>;
51 compatible = "fixed-partitions";
57 reg = <0x0 0x79c0000>;
67 compatible = "fixed-partitions";
79 reg = <0x80000 0x80000>;
83 factory: partition@100000 {
85 reg = <0x100000 0x40000>;
91 reg = <0x140000 0x400000>;
94 ubiconcat0: partition@540000 {
96 reg = <0x540000 0x1c80000>;
101 reg = <0x21c0000 0x80000>;
105 ubiconcat1: partition@2240000 {
106 label = "ubiconcat1";
107 reg = <0x2240000 0x5d40000>;
118 reg = <0x0000 0 0 0 0>;
119 mediatek,mtd-eeprom = <&factory 0x0000>;
120 ieee80211-freq-limit = <2400000 2500000>;
126 reg = <0x0000 0 0 0 0>;
127 mediatek,mtd-eeprom = <&factory 0x8000>;
128 ieee80211-freq-limit = <5000000 6000000>;
135 phy-handle = <ðphy4>;
139 ethphy4: ethernet-phy@4 {
165 groups = "uart3", "jtag";