3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "mqmaker,witi", "mediatek,mt7621-soc";
8 model = "MQmaker WiTi";
11 compatible = "gpio-keys";
15 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
16 linux,code = <KEY_RESTART>;
26 compatible = "nxp,pcf8563";
39 compatible = "jedec,spi-nor";
41 spi-max-frequency = <10000000>;
44 compatible = "fixed-partitions";
56 reg = <0x30000 0x10000>;
60 factory: partition@40000 {
61 compatible = "nvmem-cells";
63 reg = <0x40000 0x10000>;
67 eeprom_factory_0: eeprom@0 {
71 eeprom_factory_8000: eeprom@8000 {
75 macaddr_factory_e000: macaddr@e000 {
81 compatible = "denx,uimage";
83 reg = <0x50000 0xfb0000>;
95 reg = <0x0000 0 0 0 0>;
96 ieee80211-freq-limit = <5000000 6000000>;
97 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000>;
98 nvmem-cell-names = "eeprom", "mac-address";
104 reg = <0x0000 0 0 0 0>;
105 ieee80211-freq-limit = <2400000 2500000>;
106 nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000>;
107 nvmem-cell-names = "eeprom", "mac-address";
112 nvmem-cells = <&macaddr_factory_e000>;
113 nvmem-cell-names = "mac-address";
119 phy-mode = "rgmii-rxid";
120 phy-handle = <ðphy5>;
122 nvmem-cells = <&macaddr_factory_e000>;
123 nvmem-cell-names = "mac-address";
124 mac-address-increment = <1>;
128 ethphy5: ethernet-phy@5 {
159 nvmem-cells = <&macaddr_factory_e000>;
160 nvmem-cell-names = "mac-address";
161 mac-address-increment = <1>;