1 // SPDX-License-Identifier: GPL-2.0-only
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "mediatek,mt7621-soc";
12 led-boot = &led_power;
13 led-failsafe = &led_power;
14 led-running = &led_power;
15 led-upgrade = &led_power;
16 label-mac-device = &gmac0;
20 compatible = "gpio-leds";
23 label = "green:power";
24 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
29 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
30 trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
31 linux,default-trigger = "usbport";
36 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
41 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
42 linux,default-trigger = "phy0tpt";
47 compatible = "gpio-keys";
51 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_WPS_BUTTON>;
57 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_RESTART>;
62 reg_usb_vbus: regulator {
63 compatible = "regulator-fixed";
64 regulator-name = "usb_vbus";
65 regulator-min-microvolt = <5000000>;
66 regulator-max-microvolt = <5000000>;
67 gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
73 vbus-supply = <®_usb_vbus>;
82 compatible = "mediatek,mt76";
84 mediatek,mtd-eeprom = <&factory 0x8000>;
85 ieee80211-freq-limit = <5000000 6000000>;
91 compatible = "mediatek,mt76";
93 mediatek,mtd-eeprom = <&factory 0x0>;
94 ieee80211-freq-limit = <2400000 2500000>;
99 nvmem-cells = <&macaddr_factory_4>;
100 nvmem-cell-names = "mac-address";
128 nvmem-cells = <&macaddr_factory_4>;
129 nvmem-cell-names = "mac-address";
130 mac-address-increment = <2>;
137 groups = "uart3", "uart2", "jtag", "wdt";
146 compatible = "fixed-partitions";
147 #address-cells = <1>;
152 reg = <0x0 0x100000>;
157 label = "SC PART_MAP";
158 reg = <0x100000 0x100000>;
164 reg = <0x200000 0x400000>;
169 reg = <0x600000 0x2800000>;
174 reg = <0x2e00000 0x1800000>;
178 factory: partition@4600000 {
180 reg = <0x4600000 0x200000>;
186 reg = <0x4800000 0x3800000>;
193 compatible = "nvmem-cells";
194 #address-cells = <1>;
197 macaddr_factory_4: macaddr@4 {