target/linux/ramips/dts/mt7621_phicomm_k2p.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "phicomm,k2p", "mediatek,mt7621-soc";
   8         model = "Phicomm K2P";
   9
  10         aliases {
  11                 led-boot = &led_blue;
  12                 led-failsafe = &led_blue;
  13                 led-running = &led_blue;
  14                 led-upgrade = &led_blue;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 stat_r {
  21                         label = "red:status";
  22                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 stat_y {
  26                         label = "yellow:status";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_blue: stat_b {
  31                         label = "blue:status";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44         };
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         flash@0 {
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <80000000>;
  54                 m25p,fast-read;
  55
  56                 partitions {
  57                         compatible = "fixed-partitions";
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60
  61                         partition@0 {
  62                                 label = "u-boot";
  63                                 reg = <0x0 0x30000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@30000 {
  68                                 label = "u-boot-env";
  69                                 reg = <0x30000 0x10000>;
  70                                 read-only;
  71                         };
  72
  73                         factory: partition@40000 {
  74                                 label = "factory";
  75                                 reg = <0x40000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@50000 {
  80                                 label = "permanent_config";
  81                                 reg = <0x50000 0x50000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@a0000 {
  86                                 compatible = "denx,uimage";
  87                                 label = "firmware";
  88                                 reg = <0xa0000 0xf60000>;
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &pcie {
  95         status = "okay";
  96 };
  97
  98 &pcie0 {
  99         mt76@0,0 {
 100                 reg = <0x0000 0 0 0 0>;
 101                 mediatek,mtd-eeprom = <&factory 0x0>;
 102         };
 103 };
 104
 105 &gmac0 {
 106         mtd-mac-address = <&factory 0xe000>;
 107 };
 108
 109 &switch0 {
 110         ports {
 111                 port@0 {
 112                         status = "okay";
 113                         label = "lan1";
 114                 };
 115
 116                 port@1 {
 117                         status = "okay";
 118                         label = "lan2";
 119                 };
 120
 121                 port@2 {
 122                         status = "okay";
 123                         label = "lan3";
 124                 };
 125
 126                 port@3 {
 127                         status = "okay";
 128                         label = "lan4";
 129                 };
 130
 131                 port@4 {
 132                         status = "okay";
 133                         label = "wan";
 134                         mtd-mac-address = <&factory 0xe006>;
 135                 };
 136         };
 137 };
 138
 139 &state_default {
 140         gpio {
 141                 groups = "i2c", "jtag";
 142                 function = "gpio";
 143         };
 144 };