ramips: add support for SNR-CPE-ME2-SFP
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_telco-electronics_x1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
10 model = "Telco Electronics X1";
11
12 aliases {
13 led-boot = &system_led;
14 led-failsafe = &system_led;
15 led-running = &system_led;
16 led-upgrade = &system_led;
17 };
18
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22
23 keys {
24 compatible = "gpio-keys";
25
26 reset {
27 label = "reset";
28 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RESTART>;
30 };
31 };
32
33 leds {
34 compatible = "gpio-leds";
35
36 system_led: system {
37 label = "green:system";
38 gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
39 };
40
41 modem_offline {
42 label = "red:modem-offline";
43 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
44 };
45
46 modem_4g {
47 label = "blue:modem-4g";
48 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
49 };
50
51 modem_3g {
52 label = "green:modem-3g";
53 gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
54 };
55
56 modem_rssi_lowest {
57 label = "green:modem-rssi-lowest";
58 gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
59 };
60
61 modem_rssi_low {
62 label = "green:modem-rssi-low";
63 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
64 };
65
66 modem_rssi_medium {
67 label = "green:modem-rssi-medium";
68 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
69 };
70
71 modem_rssi_high {
72 label = "green:modem-rssi-high";
73 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
74 };
75
76 modem_rssi_highest {
77 label = "green:modem-rssi-highest";
78 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
79 };
80 };
81 };
82
83 &spi0 {
84 status = "okay";
85
86 flash@0 {
87 compatible = "jedec,spi-nor";
88 reg = <0>;
89 spi-max-frequency = <14000000>;
90
91 partitions {
92 compatible = "fixed-partitions";
93 #address-cells = <1>;
94 #size-cells = <1>;
95
96 partition@0 {
97 label = "bootloader";
98 reg = <0x0 0x30000>;
99 read-only;
100 };
101
102 partition@30000 {
103 label = "config";
104 reg = <0x30000 0x10000>;
105 read-only;
106 };
107
108 factory: partition@40000 {
109 label = "factory";
110 reg = <0x40000 0x10000>;
111 read-only;
112 };
113
114 firmware: partition@50000 {
115 compatible = "denx,uimage";
116 label = "firmware";
117 reg = <0x50000 0xfb0000>;
118 };
119 };
120 };
121 };
122
123 &ethernet {
124 pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
125 };
126
127 &gmac0 {
128 nvmem-cells = <&macaddr_factory_e006>;
129 nvmem-cell-names = "mac-address";
130 };
131
132 &switch0 {
133 ports {
134 port@0 {
135 status = "okay";
136 label = "lan1";
137 };
138
139 port@1 {
140 status = "okay";
141 label = "lan2";
142 };
143
144 port@2 {
145 status = "okay";
146 label = "lan3";
147 };
148
149 port@3 {
150 status = "okay";
151 label = "lan4";
152 };
153
154 port@4 {
155 status = "okay";
156 label = "wan";
157 nvmem-cells = <&macaddr_factory_e006>;
158 nvmem-cell-names = "mac-address";
159 mac-address-increment = <1>;
160 };
161 };
162 };
163
164 &state_default {
165 gpio {
166 groups = "wdt", "rgmii2";
167 function = "gpio";
168 };
169 };
170
171 &pcie {
172 status = "okay";
173 };
174
175 &pcie0 {
176 wifi@0,0 {
177 compatible = "pci14c3,7603";
178 reg = <0x0000 0 0 0 0>;
179 mediatek,mtd-eeprom = <&factory 0x0000>;
180 ieee80211-freq-limit = <2400000 2500000>;
181 };
182 };
183
184 &pcie1 {
185 wifi@0,0 {
186 compatible = "pci14c3,7662";
187 reg = <0x0000 0 0 0 0>;
188 mediatek,mtd-eeprom = <&factory 0x8000>;
189 ieee80211-freq-limit = <5000000 6000000>;
190
191 led {
192 led-sources = <2>;
193 };
194 };
195 };
196
197 &factory {
198 compatible = "nvmem-cells";
199 #address-cells = <1>;
200 #size-cells = <1>;
201
202 macaddr_factory_e006: macaddr@e006 {
203 reg = <0xe006 0x6>;
204 };
205 };