3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
8 label-mac-device = ðernet;
12 bootargs = "console=ttyS0,57600";
16 compatible = "gpio-keys";
20 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
21 linux,code = <KEY_RESTART>;
27 mtd-mac-address = <&factory 0x22>;
34 compatible = "fixed-partitions";
46 reg = <0x80000 0x60000>;
50 factory: partition@e0000 {
52 reg = <0xe0000 0x60000>;
57 reg = <0x140000 0x300000>;
62 reg = <0x440000 0x300000>;
67 reg = <0x740000 0xf7c0000>;
74 groups = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
81 * This board has 2Mb spi flash soldered in and visible
82 * from manufacturer's firmware.
83 * But this SoC shares spi and nand pins,
84 * and current driver doesn't handle this sharing well
89 compatible = "jedec,spi-nor";
91 spi-max-frequency = <10000000>;
94 compatible = "fixed-partitions";
100 reg = <0x0 0x200000>;