target/linux/ramips/dts/mt7621_wavlink_wl-wn53xax.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_status_red;
  11                 led-failsafe = &led_status_red;
  12                 led-running = &led_status_blue;
  13                 led-upgrade = &led_status_red;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 reset {
  20                         label = "Reset Button";
  21                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  22                         linux,code = <KEY_RESTART>;
  23                 };
  24
  25                 touch { /* RH6015C touch sensor -> GPIO 14 */
  26                         label = "Touch Button";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                         linux,code = <BTN_0>;
  29                 };
  30
  31                 turbo {
  32                         label = "Turbo Button";
  33                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  34                         linux,code = <BTN_1>;
  35                 };
  36
  37                 wps {
  38                         label = "WPS Button";
  39                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 led_status_blue: status_blue {
  48                         label = "blue:power";
  49                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 led_status_red: status_red {
  53                         label = "red:power";
  54                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  55                 };
  56
  57                 wifi2g {
  58                         label = "blue:wifi2g";
  59                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62         };
  63 };
  64
  65 &i2c {
  66         status = "okay";
  67 };
  68
  69 &spi0 {
  70         status = "okay";
  71
  72         flash@0 {
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <40000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         partition@0 {
  83                                 label = "u-boot";
  84                                 reg = <0x0 0x30000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@30000 {
  89                                 label = "config";
  90                                 reg = <0x30000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         factory: partition@40000 {
  95                                 label = "factory";
  96                                 reg = <0x40000 0x10000>;
  97                                 read-only;
  98
  99                                 nvmem-layout {
 100                                         compatible = "fixed-layout";
 101                                         #address-cells = <1>;
 102                                         #size-cells = <1>;
 103
 104                                         eeprom_factory_0: eeprom@0 {
 105                                                 reg = <0x0 0x400>;
 106                                         };
 107
 108                                         eeprom_factory_8000: eeprom@8000 {
 109                                                 reg = <0x8000 0x4da8>;
 110                                         };
 111
 112                                         macaddr_factory_e000: macaddr@e000 {
 113                                                 reg = <0xe000 0x6>;
 114                                         };
 115
 116                                         macaddr_factory_e006: macaddr@e006 {
 117                                                 reg = <0xe006 0x6>;
 118                                         };
 119                                 };
 120                         };
 121
 122                         partition@50000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x50000 0xeb0000>;
 126                         };
 127
 128                         partition@f00000 {
 129                                 label = "vendor";
 130                                 reg = <0xf00000 0x100000>;
 131                                 read-only;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &pcie {
 138         status = "okay";
 139 };
 140
 141 &pcie0 {
 142         wifi0: mt76@0,0 {
 143                 compatible = "mediatek,mt76";
 144                 reg = <0x0000 0 0 0 0>;
 145                 nvmem-cells = <&eeprom_factory_0>;
 146                 nvmem-cell-names = "eeprom";
 147         };
 148 };
 149
 150 &pcie1 {
 151         wifi1: mt76@0,0 {
 152                 compatible = "mediatek,mt76";
 153                 reg = <0x0000 0 0 0 0>;
 154                 nvmem-cells = <&eeprom_factory_8000>;
 155                 nvmem-cell-names = "eeprom";
 156         };
 157 };
 158
 159 &ethernet {
 160         pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
 161 };
 162
 163 &gmac0 {
 164         nvmem-cells = <&macaddr_factory_e000>;
 165         nvmem-cell-names = "mac-address";
 166 };
 167
 168 &switch0 {
 169         ports {
 170                 port0: port@0 {
 171                         status = "okay";
 172                 };
 173
 174                 port1: port@1 {
 175                         status = "okay";
 176                 };
 177
 178                 port2: port@2 {
 179                         status = "okay";
 180                 };
 181
 182                 port3: port@3 {
 183                         status = "okay";
 184                 };
 185
 186                 port@4 {
 187                         status = "okay";
 188                         label = "wan";
 189                         nvmem-cells = <&macaddr_factory_e006>;
 190                         nvmem-cell-names = "mac-address";
 191                 };
 192         };
 193 };
 194
 195 &state_default {
 196         gpio {
 197                 groups = "rgmii2", "jtag", "wdt";
 198                 function = "gpio";
 199         };
 200 };
 201
 202 &uartlite2 {
 203         status = "okay";
 204 };